Benchwheel Penny Electric Skateboard
From ivc wiki
Jump to navigationJump to search
The Benchwheel Penny Board is a 28-in / 71cm single 1000W motor electric skateboard. It's what you would call a Chinese electric skateboard. The appeal is to make a battery powered Penny Board (the plastic boards), actually this is the size of the Nickel board and made of wood instead of plastic.
The range is 10km to 15km / 6 to 10 miles with a max. speed of 24kph / 15mph, but expect less if you don't upgrade to better quality parts yourself. Retail price 349 USD + shipping.
- Benchwheel website - boards
- Benchwheel Penny Electric Skateboard product page - Aliexpress
- Support email: info@benchweel.com
Features
- Comes in two board designs: a classic look and a tech-look, both light-weight, resilient and durable
- Excellent grip carved out grip at the board end for convenient carrying
- Sturdy high-clearance metal box protects the batteries and electronics when going over rough terrains, the slim case design provides low-visible signature making the board appear non-electric
- Large 80 mm high-speed PU wheels
- 36 Volt 1000 Watt high-powered brush-less motor provides top speeds up to 24 kph / 15 mph featuring regenerative braking
- Ergonomic 2.4GHz remote controlling driving modes (speed/energy saving) and direction, the controller employs sine-wave modulation allowing fine-grained speed control
- Recharge the controller only once per week, conveniently on the mini USB charging port
- 90Wh battery pack providing driving ranges of around 10 km / 6 miles, Samsung batteries cells with high discharge
- 1.5 hour quick charging
- Gear ratio 1:3 (16-48T) for responsiveness and fast acceleration
Specifications
- Released: January 2017
- Model: D1 / D2
- Re-branded boards: LiftBoard
- Based- and improved-upon: Benchwheel Dual 1800W Motor 2015, Benchwheel Single 1800W Motor 2015
- Board: Bamboo and maple composite, tech model 3 layer bamboo + 2 layer fiber glass, classic model 7 layer maple + 2 layer fiber glass
- Controller: Custom sine-wave modulation (FOC) controller (ESC), battery management and charger (BMS) - both separate boards
- Battery: Lithium-ion INR (Lithium manganese nickel - LiNiMnCoO2) 2.5Ah 90Wh 10S1P 36V (10x3.6V) 520g 14 AWG wires XT60 connector, Samsung INR18650-25R M 20A discharge green 18650 cells
- Upgrade: Samsung 30Q 3000mAh 15A / LG HG2 3000mAh cells for longer range, or Sony VTC4 18650 2100mAh 30A cells for better torque - 6USD ea
- Charger: 100-220V AC input, 42V 2A output adapter with 3-pin plug, CE RoHS
- Motor: N5065 170kV 14-pole 1000W 50A 61x49.5mm Ø8 bore Ø30 mounting pattern brushless motor with closed back cover
- Wheels: PU 80x45mm 78A hardness - drive wheel has 8 spoke
- Belt: HTD 225-3M 15mm?/13mm 75 teeth 3mm pitch 225mm pitch length
- Upgrade: SDP A 6R23M075150 3mm (HTD) Pitch, 75 Teeth, 15mm wide Single Sided Neoprene Belt with Fiberglass Cords - 9.90USD
- Change the drive train with 5mm pitch pulleys and belt for better power traction, less wear
- Wheel pulley: 48T OD45mm ID36mm 3mm pitch 16mm wide grooves
- Motor pulley: 16T OD16mm? ID8mm bore 3mm pitch 16mm wide grooves
- Bearings: 8x 608-2Z OD22mm ID8mm 7mm wide NMB skateboard bearings
- Upgrade: Zealous with integrated spacer 20USD, or Bones Reds ceramics 50USD, or Loaded Jehu (use in Boosted) 20USD, or ACER SK8 Ceramic 608 Bearings 35USD
- Remote: Ergonomic, two-speed (full-speed/half-speed), jog-stick (forward/reverse), 3-LED board battery level indicator, 800mAh LiPo battery, mini-USB charging, nRF24L01+ based 2.4GHz transmitter and receiver module - reliable
- Grip tape: Tech or Classic design
- Case: Aluminium with RGB LED light strip underneath
- Upgrade: Better quality grip tape
- Weatherproof: No official rating, but electronics case is sealed except charging port and power button
- Max. load: 100 kg / 220 lbs
- Length: 70.9cm / 28-in
- Ride height: 13.9cm / 5.5-in
- Truck width: 26cm / 10.3-in
- Weight: 4.8kg / 10.6lbs
- Kit contents:
- 1x Benchwheel Penny Board Electric Skateboard fully assembled
- 1x Benchwheel wireless remote pre-paired
- 1x 100 to 240V AC 42V 2A DC adapter
- 1x mini-USB remote charging cable
- 1x EU power cable, UK power cable
- 1x US power cable, AU power cable
- 1x Certification stickers
- 1x Warning leaflet
- 1x Quick-start guide
Upgrades
- Front and tail LED light mounts/reflectors - be seen
- Belt cover - 3D printed to prevent grit coming in-between the belt and pulley
- Current sensor, ESP current and voltage display - battery health
- On-board web server with current and voltage chart history on OLED display/wireless OLED
- External 2A USB power socket - to charge the remote and phone
- Replace rear truck with dual motor and extra speed controller - more speed and acceleration
- Swap over to HTD-5M 15mm 53T belt and 15-36T (or 15-40T) pulleys - for more efficient drive train
Truck assembly
Front truck, regular assembly
Rear truck with motor, belt, pulleys and wheels - note: dual motor shown in drawing
Rear drive wheel
Hand-held remote control
Electronics bay
Analysis
Pros
- Small and relatively light-weight
- Great value at low cost
- Fast and good hill climbing ability
- Good torque and responsiveness due to belt drive
- Powerful 1000W motor
- Handle cut-out to carry the board
- Easy to use and reliable remote control
- Repair and disassembly relatively easy
- Modular design
- Electronics bay opens by removing six screws
- Stronger trucks then previous Benchwheel boards
- Possible two swap drive wheel with any three for even wear
- Motor assembly can be installed on either left or right rear side
Cons
- Board does not flex, hard ride - if trucks loosened, becomes wobbly
- Charging port and power button not weatherproof
- Belt exposed to dust and grit
- Drive-train a bit noisy
- Motor pulley glued in-place with thread-lock
- Battery not easily replaceable (or swappable)
- Poor wheel traction on wet ground
- No head- or tail-lights
Repair / maintenance
Official repair videos are available on YouTube.
Guides
