Difference between revisions of "FrSky Taranis Radio"
| (11 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido. | The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido. | ||
== Contents == | |||
Base contents: | |||
* 1x Aluminium case | |||
* 1x Taranis radio | |||
* 1x 6-cell 7.2V 800mAh NiMH green battery pack | |||
* 1x Neck strap | |||
Optionals: | |||
* 1x FrySky X8R 2.4GHz receiver | |||
* 1x Charger with DC plug, 110V or 220V | |||
== Configuration tool == | |||
One of the nice features of this radio is that all configuration can be done off-radio, which means that you can use a computer to perform the setup - no more fiddling around with a small screen and buttons. | |||
* [http://code.google.com/p/companion9x/ OpenTx Campanion 9x configuration tool] - OSX/Win/Lin | |||
== Tutorial == | |||
There is a set of great video tutorials by Scott Page detailing the setup of the taranis, take a [https://www.youtube.com/user/PagesFlyingCircus/videos look at his Youtube channel]. | |||
== Battery == | |||
The stock NiMh battery is rather cheap and low capacity - 7.2V 800mAh. Replacing it extends the use time in the field. Change the radio battery alarm in the "Radio Setup" menu. The battery connector on the Taranis is a 2S JST-XH - on a 3S battery solder in a 2S connector from an extension cable to make hooking up the battery easy. Note that 72MHz and UHF transmitters normally works best at 12V (more RF output power), requiring a step-up converter or a dedicated 3S LiPo (not LiFe) external battery pack. | |||
Always charge LiFe and LiPo TX packs externally - not though the plug on the radio. | |||
* HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack - safe and low discharge battery | |||
* Zippy Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack - safe | |||
Additonal 2S connector for pluggin into the Taranis: | |||
* JST-XH 2S Wire Extension 20cm - cut one end and solder to battery | |||
== Fix audio buzz == | == Fix audio buzz == | ||
On Rev. A radios, when using JR-module on the back, especially high powered ones, there is a noticable buzzing sound coming from the speaker. It is caused by RFI noise inductively coupled into the wires inside the radio. By opening it and adding to clip-on toroid eliminates the problem or add a decoupler capacitor. | |||
* [http://openrcforums.com/forum/viewtopic.php?f=97&t=4094&sid=bc0c06fe207dd6eefbba9d47e0071c4c&start=60 Speaker buzz] | |||
* [http://www.thelasercutter.com/2014/01/taranis-speaker-hum-one-many-solutions/ Taranis speaker hum] | * [http://www.thelasercutter.com/2014/01/taranis-speaker-hum-one-many-solutions/ Taranis speaker hum] | ||
* [http://www.youtube.com/watch?v=ft69r6m5Sxo Capacitor mod to reduce hum] | |||
Latest revision as of 17:39, 29 March 2014
The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido.
Contents
Base contents:
- 1x Aluminium case
- 1x Taranis radio
- 1x 6-cell 7.2V 800mAh NiMH green battery pack
- 1x Neck strap
Optionals:
- 1x FrySky X8R 2.4GHz receiver
- 1x Charger with DC plug, 110V or 220V
Configuration tool
One of the nice features of this radio is that all configuration can be done off-radio, which means that you can use a computer to perform the setup - no more fiddling around with a small screen and buttons.
- OpenTx Campanion 9x configuration tool - OSX/Win/Lin
Tutorial
There is a set of great video tutorials by Scott Page detailing the setup of the taranis, take a look at his Youtube channel.
Battery
The stock NiMh battery is rather cheap and low capacity - 7.2V 800mAh. Replacing it extends the use time in the field. Change the radio battery alarm in the "Radio Setup" menu. The battery connector on the Taranis is a 2S JST-XH - on a 3S battery solder in a 2S connector from an extension cable to make hooking up the battery easy. Note that 72MHz and UHF transmitters normally works best at 12V (more RF output power), requiring a step-up converter or a dedicated 3S LiPo (not LiFe) external battery pack.
Always charge LiFe and LiPo TX packs externally - not though the plug on the radio.
- HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack - safe and low discharge battery
- Zippy Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack - safe
Additonal 2S connector for pluggin into the Taranis:
- JST-XH 2S Wire Extension 20cm - cut one end and solder to battery
Fix audio buzz
On Rev. A radios, when using JR-module on the back, especially high powered ones, there is a noticable buzzing sound coming from the speaker. It is caused by RFI noise inductively coupled into the wires inside the radio. By opening it and adding to clip-on toroid eliminates the problem or add a decoupler capacitor.
