TBS Discovery Pro

From ivc wiki
Revision as of 18:17, 30 August 2013 by Ivc (talk | contribs)
Jump to navigationJump to search
Tbs discovery pro air.jpg

The Discovery Pro is made by Team BlackSheep and spesially made for aerial photography and videography. It is based on the TBS Discovery with additional electronics for the on-board brushless gimbal controller and video switcher.

Specifications

  • Released:
    Tbs discovery pro kit.jpg
    • DJI Flame Wheel: November 2011
    • TBS Discovery Pro: July 2013
  • Type: Asymmetric spider quadrotor
  • Airframe: Reinforced fiberglass
  • Absolute size: *notyet*
  • Frame only size: *notyet*
  • All up weight: 1500-2000 grams
    • Frame with arms: 414 grams
    • Frame only: *notyet* grams
  • Takeoff weight: 800-1200 grams
  • Current sensor: on-board 50A
  • Battery: 4S 3300-4500mAh 30C+ single LiPo pack recommended
    • Battery weight: 320-460 grams recommended
    • Battery cage: *notyet* mm - extreme dimensions, aim for 4-8 mm less for good fit
      • Usable battery space: *notyet*
      • Note: at L142 mm, limited by the rear arms on the top plate to either W36 or H31 mm
  • Suitable motors: 22x12 mm (Ø28x26-28mm) or 22x16 mm (Ø28x30-34mm) recommended, 900KV, 150-250W, 50-75grams
    • Motor mount arms: 16x19 mm pattern
  • Propellers: 9x5-inch (more locked-in, less airtime) or 10x5-inch (more airtime, less locked-in)
  • ESC: 4x 18-30A 400Hz switched speed controller
  • Forward speed: ~60 km/h / ~40 miles/h
  • Flight time: 10-12 minutes
  • Center of Gravity: 15 mm forward of the bottom Center of Thrust mark
  • Behaviors like: T-Rex 450 without 3D capability [1]
  • Recommended flying area: minimum 25x25 meters
  • Screws: Frame arms 24x M2.5x5mm, frame spacers 8x M3x6mm, motors 16x M3x8mm
  • Clone arms: HJ450, RM450, Q450, FY450 [2]
  • Product pages:
    • DJI Hobby - Flame Wheel kits and NAZA flight controller
    • Team BlackSheep - TBS Discovery Pro - Gimbal camera and FPV frame
  • Similar models:

Manual

I put most of my time on this project creating the official manual for the PRO.

Illustrations

Board revisions

  • v1.0 May 2013 - pre-production model, used for internal testing
  • v1.1 July 2013 - launch production model, shipped August 2013

Accessories

  • TBS Discovery case
  • Pelican 1550 case

Presentation

DISCOVERY PRO announcement:

Video switching example:

Quick assembly and installation video:

References