Xbox 360 Lite-On DG16D2S Extract Key

Serial Controller

Build

MAX3232

Connect

LiteOn connect wires

Dump Key

Utility

Download DVDKey or DVDKey32. Create a dos boot disk, put DVDKey on the flash drive.

Find SATA Port

Dosflash VT6421 or Slax with drive connected

Dump

Required:

• Native SATA controller or VIA VT6421A or L PCI card
• Power to the Lite-On drive
  • Either via Team Xecuter Connectivity kit v1/v2 or Xbox 360 near the computer

The tray has to stay half open for the process to work. Once the drive tray is half open it will stay open, not close on the next power up as a normal drive would do.

Open the tray half way:

1. Power on the drive
2. Press the eject button - On the Connectivity Kit or front of the Xbox 360
3. Remove the power again
4. Manually press the drive in half-way

Dumping procedure:

1. Power off the computer
2. Connect the serial controller cable to COM1 (first/top port on the back of the machine) - Can be connected all the time if retries
3. Connect power to the Lite-On drive
4. Power on the computer
5. Boot DOS, either from hard drive or a flash drive, DVDKey already installed
6. Plug in the SATA cable to the Lite-On drive
7. Execute DVDKey with the SATA port found above:
   • dvdkey a000

The output should be something like this:

c:\DVDKEY>dvdkey a000
Port A000
Drive Present
Wait about 20 seconds

GOT SOMETHING !!!    sona: 03   sega: 54
DVD key:
9174C2D5905AE8B9ACB23CD116XXXXXX
Seems a GOOD Key!!!!
KEY.BIN saved

PLDS   DG-16D2S      74850XXX
INQUIRY.BIN saved

PLDS   DG-16D2S
IDENTIFY.BIN saved

c:\DVDKEY>