Difference between revisions of "Xbox 360 Revisions"

From ivc wiki
Jump to navigationJump to search
Line 67: Line 67:
* 150 Watt power supply, 12V rated for 12.1A, new connector
* 150 Watt power supply, 12V rated for 12.1A, new connector
* Larger '''256 MB''' on-board flash, up from 16 MB, to accommodate the "New Xbox Experience" (NXE) update
* Larger '''256 MB''' on-board flash, up from 16 MB, to accommodate the "New Xbox Experience" (NXE) update
 
 
 
 
 
 
 
 
 
 
 


== Valhalla ==
== Valhalla ==

Revision as of 19:58, 28 November 2008

Xenon

IBM 90 nm CPU (glue is only on Zephyr)
ATI 90 nm GPU and embedded DRAM chip

The original Xbox 360 configuration used in the initial Premium and Core machines released in the end of November 2005. These are also know as the RRoD (Red Ring of Death) machines because the GPU chip warps away from the motherboard because of excessive heat.

  • IBM 90 nm CPU
  • ATI 90 nm GPU and on-chip DRAM
  • Low profile GPU cooler
  • Standard CPU cooler
  • 203 Watt output power supply

Xbox 360 revisions xenon motherboard.jpg Xbox 360 revisions xenon cooling.jpg

Zephyr

IBM 90 nm CPU (glue is only on Zephyr)
ATI 90 nm GPU and embedded DRAM chip

Zephyr was the first revision with HDMI connector and fixed the RRoD problem cause by the inadequate GPU cooling on Xenon boards.

It was introduced with the Xbox 360 Elite in May 2007. In July 2007 Xbox 360 Premium machines began appearing with the Zephyr motherboard.

  • New Elite model includes 120 GB hard drive
  • Updated motherboard layout
  • HDMI output
  • Glue around the CPU
  • Extended GPU cooler
  • Still 90 nm CPU and 90 nm GPU

Xbox 360 revisions zephyr motherboard.jpg Xbox 360 revisions zephyr cooling.jpg

Falcon

IBM 65 nm CPU
ATI 90 nm GPU and smaller embedded DRAM chip

All Xbox 360 Premium machines and Arcade machines manufactured August 2007 introduced the new 65 nm CPU accompanied with a new cooler and still 90 nm GPU with the Zephyr cooler. The motherboard is based on Zephyr and requires fewer components (some capacitors and coils removed) for the new 65 nm CPU, resulting in lower costs.

Starting September 2007 the newest Xbox 360 Premium machines shipped with the Falcon board. Xbox 360 Elite machines were eventually updated to Falcon boards too. Xbox 360 packages with LOT number 0734 or higher will most likely be Falcon machines.

  • IBM 65 nm CPU
  • ATI 90 nm GPU
  • Bigger and enhanced CPU cooler
  • Fewer voltage regulators, capacitors and inductors
  • 175 Watt power supply - 12V rated for 14.2A, new connector

Xbox 360 revisions falcon motherboard.jpg Xbox 360 revisions falcon cooling.jpg

Opus

This is an intermediate motherboard with 65 nm CPU and 90 nm GPU, new coolers, but no HDMI. It will be used in Xenon chassis for repairs and RRoD affected machines.

Started to appear end of July 2008 in machines coming back from repair.

  • Falcon based board
  • No HDMI output
  • IBM 65 nm CPU
  • ATI 90 nm GPU
  • Falcon CPU cooler
  • Zephyr GPU cooler

Xbox 360 revisions opus motherboard.jpg Xbox 360 revisions opus back.jpg

Jasper

ATI 65 nm GPU
150 Watt powersupply

Jaster will be released in late 2008 and introduce the 65 nm GPU to reduce the cost and power usage further. The new powersupply is rated for 150 Watt, down form 175 Watt on the Falcon. The Amperage is also down to 12.1A on the 12V rail (12.1A x 12V = 145.2W)

  • IBM 65 nm CPU
  • ATI 65 nm GPU
  • 150 Watt power supply, 12V rated for 12.1A, new connector
  • Larger 256 MB on-board flash, up from 16 MB, to accommodate the "New Xbox Experience" (NXE) update

                     

Valhalla

A future version that will have both the CPU and GPU on a single die.

References