Film Projects

Blue or Green-screen

Quotes:

If you can plan your DV shot to have mostly dark subjects (dark hair & clothing) in front of a green screen (or bright/blond subjects in front of blue), you can use the color difference key to pull a quick core matte, then turn to a luma-based solution to bring out the edge details.

With DV and DVCam, you won't have as much color information per pixel due to compression, so good mattes are harder to pull. It ends up looking pretty aliased. Both NTSC and Pal DV formats have pretty low sampling (4:1:1 for NTSC and 4:2:0 for Pal).

It was all pixelated and jagged edges. How do u get around this? The technique that I've heard used most often is that you blur the UV channels (the chromanance part of the YUV) then mix that back in with the Y (luminance) and your ready to pull a matte. Do just enough blur so the pixelated jagged edges soften. Use that only for pulling the matte. Once you've got your matte, go back and use the original footage for applying the matte.

• GreenScreen
• Matte cration in After Effects
• dvMattePro
• Green Screen!
• Bluescreen on the cheap?
• Bluescreen on a budget

Programs / Plug-ins

• dvMattePro
• Keylight
• Shake (OS X only)
• Final Cut Pro (OS X only)

Lightning

• Soft Lightning
• PhotoFlex / PhotoFlex Equipment Lessons