Difference between revisions of "Eee PC Benchmarks"
| Line 32: | Line 32: | ||
The temperature can be found by executing 'cat /proc/acpi/thermal_zone/TZ00/temperature'. | The temperature can be found by executing 'cat /proc/acpi/thermal_zone/TZ00/temperature'. | ||
== Wifi == | |||
After installing the new draft-N adapter I haven't had any problems or disconnects that some people are experiencing. On a 802.11g network I transferred files at 2.6 MB/s for an hour without problems. | |||
[[Image:Eee wifi transfer g-network.png]] | |||
== Programs == | == Programs == | ||
Revision as of 00:30, 23 December 2007
Overclocking
Clockspeed
The is CPU frequency is calculated by multiplying the FSB with the multiplier of the CPU. Front-Side-Bus (FSB) frequency is the speed between the CPU and Memory Controller (ICH6), and quad-pumped (4x bus speed). The DDR2 Memory speed is between the Memory Module and Memory Controller, it's double-pumped (2x bus speed) and dual-rated. The bus speed is the base clock speed provided by the Phase-Locked-Loop generator.
Windows
Currently the only way to overclock in Windows is by using a program called SetFSB, by Abo from Japan.
The stock 0401 BIOS did not allow for much overclocking. Reverting back to the earlier 8804 BIOS version allowed for impressive results, 997.6 MHz before crashing. For some reason I can't get it over 1 GHz, a problem with the program or PLL maybe?
The current version of SetFSB doesn't support the correct ICS9LPR426AGLF PLL chip yet, but I have contacted the author and he will try to add support for it. In the meantime, it's possible to use the similar ICS9LPRS906CGLF instead. The DDR and PCIe speed ratings are improperly reported, but it's still possible to change the FSB.
Update: I've received a new version that works with ICS9LPR426AGLF support, download.
Overclock
Software: SetFSB 2.0 build 18q BIOS version: 8804
- CPU frequency: 997.6 MHz
- FSB frequency: 221.7 MHz
- Bus speed: 110.8 MHz
- PCIe speed: 99.8 MHz (locked)
- PCI speed: 33.3 MHz (locked)
- Temperature/fan trigger:
Linux
To get the actual processor speed in linux, the 'p4_clockmod' module has to be unloaded, 'rmmod p4_clockmod'. Get the CPU information by 'cat /proc/cpuinfo' in a terminal window.
The temperature can be found by executing 'cat /proc/acpi/thermal_zone/TZ00/temperature'.
Wifi
After installing the new draft-N adapter I haven't had any problems or disconnects that some people are experiencing. On a 802.11g network I transferred files at 2.6 MB/s for an hour without problems.
