Difference between revisions of "FrSky Taranis Radio"
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido. | The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido. | ||
== Contents == | |||
Base contents: | |||
* 1x Aluminium case | |||
* 1x Taranis radio | |||
* 1x 6-cell 7.2V 800mAh NiMH green battery pack | |||
* 1x Neck strap | |||
Optionals: | |||
* 1x FrySky X8R 2.4GHz receiver | |||
* 1x Charger with DC plug, 110V or 220V | |||
== Configuration tool == | |||
One of the nice features of this radio is that all configuration can be done off-radio, which means that you can use a computer to perform the setup - no more fiddling around with a small screen and buttons. | |||
* [http://code.google.com/p/companion9x/ OpenTx Campanion 9x configuration tool] - OSX/Win/Lin | |||
== Tutorial == | |||
There is a set of great video tutorials by Scott Page detailing the setup of the taranis, take a [https://www.youtube.com/user/PagesFlyingCircus/videos look at his Youtube channel]. | |||
== Battery == | == Battery == | ||
The stock NiMh battery is rather cheap and low capacity - 7.2V 800mAh. Replacing it extends the use time in the field. Change the radio battery alarm in the "Radio Setup" menu. Note that 72MHz and UHF transmitters normally works best at 12V, requiring a step-up converter or a dedicated external battery pack. | The stock NiMh battery is rather cheap and low capacity - 7.2V 800mAh. Replacing it extends the use time in the field. Change the radio battery alarm in the "Radio Setup" menu. The battery connector on the Taranis is a 2S JST-XH - on a 3S battery solder in a 2S connector from an extension cable to make hooking up the battery easy. Note that 72MHz and UHF transmitters normally works best at 12V (more RF output power), requiring a step-up converter or a dedicated 3S LiPo (not LiFe) external battery pack. | ||
Always charge LiFe and LiPo TX packs externally - not though the plug on the radio. | Always charge LiFe and LiPo TX packs externally - not though the plug on the radio. | ||
| Line 8: | Line 30: | ||
* HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack - safe and low discharge battery | * HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack - safe and low discharge battery | ||
* Zippy Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack - safe | * Zippy Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack - safe | ||
Additonal 2S connector for pluggin into the Taranis: | |||
* JST-XH 2S Wire Extension 20cm - cut one end and solder to battery | |||
== Fix audio buzz == | == Fix audio buzz == | ||
On Rev. A radios, when using JR-module on the back, especially high powered ones, there is a noticable buzzing sound coming from the speaker. It is caused by RFI noise inductively coupled into the wires inside the radio. By opening it and adding to clip-on toroid eliminates the problem or add a decoupler capacitor. | |||
* [http://openrcforums.com/forum/viewtopic.php?f=97&t=4094&sid=bc0c06fe207dd6eefbba9d47e0071c4c&start=60 Speaker buzz] | * [http://openrcforums.com/forum/viewtopic.php?f=97&t=4094&sid=bc0c06fe207dd6eefbba9d47e0071c4c&start=60 Speaker buzz] | ||
* [http://www.thelasercutter.com/2014/01/taranis-speaker-hum-one-many-solutions/ Taranis speaker hum] | * [http://www.thelasercutter.com/2014/01/taranis-speaker-hum-one-many-solutions/ Taranis speaker hum] | ||
* [http://www.youtube.com/watch?v=ft69r6m5Sxo Capacitor mod to reduce hum] | |||
Latest revision as of 16:39, 29 March 2014
The Taranis is the first hi-end R/C radio based on the OpenTX open source project. The transmitter is packed with features and ways to customize the raido.
Contents
Base contents:
- 1x Aluminium case
- 1x Taranis radio
- 1x 6-cell 7.2V 800mAh NiMH green battery pack
- 1x Neck strap
Optionals:
- 1x FrySky X8R 2.4GHz receiver
- 1x Charger with DC plug, 110V or 220V
Configuration tool
One of the nice features of this radio is that all configuration can be done off-radio, which means that you can use a computer to perform the setup - no more fiddling around with a small screen and buttons.
- OpenTx Campanion 9x configuration tool - OSX/Win/Lin
Tutorial
There is a set of great video tutorials by Scott Page detailing the setup of the taranis, take a look at his Youtube channel.
Battery
The stock NiMh battery is rather cheap and low capacity - 7.2V 800mAh. Replacing it extends the use time in the field. Change the radio battery alarm in the "Radio Setup" menu. The battery connector on the Taranis is a 2S JST-XH - on a 3S battery solder in a 2S connector from an extension cable to make hooking up the battery easy. Note that 72MHz and UHF transmitters normally works best at 12V (more RF output power), requiring a step-up converter or a dedicated 3S LiPo (not LiFe) external battery pack.
Always charge LiFe and LiPo TX packs externally - not though the plug on the radio.
- HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack - safe and low discharge battery
- Zippy Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack - safe
Additonal 2S connector for pluggin into the Taranis:
- JST-XH 2S Wire Extension 20cm - cut one end and solder to battery
Fix audio buzz
On Rev. A radios, when using JR-module on the back, especially high powered ones, there is a noticable buzzing sound coming from the speaker. It is caused by RFI noise inductively coupled into the wires inside the radio. By opening it and adding to clip-on toroid eliminates the problem or add a decoupler capacitor.
