Difference between revisions of "Xbox 360 Lite-On DG16D2S Extract Key"

From ivc wiki
Jump to navigationJump to search
Line 26: Line 26:
** Either via Team Xecuter Connectivity kit v1/v2 or place the Xbox 360 near the computer
** Either via Team Xecuter Connectivity kit v1/v2 or place the Xbox 360 near the computer


The tray has to stay half open for the process to work. Once the drive tray is half open it will stay open, not close on the next power up as a normal drive would do.
==== Half Open Tray ====
 
The tray has to stay half open during the process. Once the drive tray is half-open it will stay open, not close on the next power up as a normal drive would do.
 
''Note:'' On some setups it's not needed to have the tray half-open, it works fine with the tray closed.


Open the tray half way:
Open the tray half way:
Line 34: Line 38:
# Manually press the drive in half-way
# Manually press the drive in half-way


Dumping procedure:  
==== Dumping Procedure ====
 
Follow this procedure to dump the key:
 
# Power off the computer
# Power off the computer
# Disconnect power and SATA cable on the Lite-On drive
# Disconnect power and SATA cable on the Lite-On drive

Revision as of 13:03, 31 August 2008

Serial Controller

Build

MAX3232

Connect

LiteOn connect wires

Dump Key

Utility

Download DVDKey or DVDKey32. Create a dos boot disk, put DVDKey on the flash drive.

Find SATA Port

Dosflash VT6421 or Slax with drive connected

Dump

Required:

  • Native SATA controller or VIA VT6421A or VT6421L PCI card
  • Power to the Lite-On drive:
    • Either via Team Xecuter Connectivity kit v1/v2 or place the Xbox 360 near the computer

Half Open Tray

The tray has to stay half open during the process. Once the drive tray is half-open it will stay open, not close on the next power up as a normal drive would do.

Note: On some setups it's not needed to have the tray half-open, it works fine with the tray closed.

Open the tray half way:

  1. Power on the drive
  2. Press the eject button - On the Connectivity Kit or front of the Xbox 360
  3. Remove the power again
  4. Manually press the drive in half-way

Dumping Procedure

Follow this procedure to dump the key:

  1. Power off the computer
  2. Disconnect power and SATA cable on the Lite-On drive
  3. Connect the serial controller cable to COM1 (first/top port on the back of the machine) - Can be connected all the time if retries
  4. Connect power to the Lite-On drive
  5. Power on the computer
  6. Boot DOS, either from hard drive or a flash drive, DVDKey already installed
  7. Plug in the SATA cable to the Lite-On drive
    • Note: On some computers, the cable can be plugged in before the computer is powered on
  8. Execute DVDKey with the SATA port found above:
    • dvdkey a000
  9. After 20-30 seconds the key will be dumped

The output should be something like this: 

c:\DVDKEY>dvdkey a000
Port A000
Drive Present
Wait about 20 seconds

GOT SOMETHING !!!    sona: 03   sega: 54
DVD key:
9174C2D5905AE8B9ACB23CD116XXXXXX
Seems a GOOD Key!!!!
KEY.BIN saved

PLDS   DG-16D2S      74850XXX
INQUIRY.BIN saved

PLDS   DG-16D2S
IDENTIFY.BIN saved

c:\DVDKEY>

If you got something like this, you need to power down the drive between each try: 

c:\DVDKEY>dvdkey a000
Port A000
Drive Present
Wait about 20 seconds

It didn't work, sorry   reg1: 54
DVD key:
00000000000000000000000000000000
Seems NOT a good DVD Key!!! 00 00
KEY.BIN saved


c:\DVDKEY>

Spoof

Retrieved from "https://beta.ivc.no/wiki/index.php?title=Xbox_360_Lite-On_DG16D2S_Extract_Key&oldid=4240"