Difference between revisions of "Lumenier QAV250 Quadcopter"
From ivc wiki
Jump to navigationJump to search
| Line 13: | Line 13: | ||
* Recommended flying area: small park, forest, garden, football field | * Recommended flying area: small park, forest, garden, football field | ||
** Recommended gear: | ** Recommended gear: | ||
** Flight controller: OpenPilot CC3D | |||
** Battery: 3S 1300-1800mAh 30C+ single LiPo pack recommended | ** Battery: 3S 1300-1800mAh 30C+ single LiPo pack recommended | ||
** Motors: 2206 class, 2000KV, 100-150W, 20-40grams | ** Motors: 2206 class, 2000KV, 100-150W, 20-40grams | ||
| Line 32: | Line 33: | ||
== Settings == | == Settings == | ||
* [timnilson CC3D settings 2013- | |||
Revision as of 13:26, 3 February 2014
The QAV250 is a small and nimble quadcopter platform. It is made by Lumenier which is a team of engineers and pilots from around the world and is available at getfpv.com
Specifications
- Released: 2013-11-19
- Manufacturer: Lumenier (GetFPV, FPV Manuals)
- Type: Symmetric mini H-type quadrotor
- Airframe: G10 material - glass-reinforced epoxy laminate sheets
- Frame size: W204.78 x L218.78 x H51.00 mm
- All-up-weight: 500-600 grams
- Flight time: 5-8 min (1300mAh)
- Center of Gravity: Center of frame, mid-point
- Behaviors like: Flying R/C car
- Recommended flying area: small park, forest, garden, football field
- Recommended gear:
- Flight controller: OpenPilot CC3D
- Battery: 3S 1300-1800mAh 30C+ single LiPo pack recommended
- Motors: 2206 class, 2000KV, 100-150W, 20-40grams
- Propellers: 5x3-inch - 2xCW 2xCCW
- ESC: 4x 10-15A 3S LiPo Speed Controllers
- Kit contents: 1x QAV250 G10 airframe, board camera mount, and hardware, 1x Power distribution board, 2x LED boards (1 red, 1 white), 1x set of aluminum landing gear and vinyl feet, 5-inch Anti-Vibration neoprene tape, 1x Lumenier lipo strap
- Product pages:
- QAV250 Mini FPV Quadcopter product page - further details, equipment
- QAV250 discussuion thread - Lumenier team is active here
Revisions
- V1.0 - 2013-11-19
- Initial release
- V2.0 - 2014-01-30
- New motor mounting holes, more options for different bolt patterns
- Thicker G10 material for the motor mounting plate
- Bumpers edge on the end of the arms to protect the motor during a crash
- Flight controller cover plate includes cutouts for SMA connectors and adapters for the video transmitter.
Settings
- [timnilson CC3D settings 2013-
