Victron VE Direct DIY Cable

From ivc wiki
Revision as of 01:42, 30 November 2016 by Ivc (talk | contribs) (Created page with "If you broke or lost the VE.Direct cable for your Victron device, you can make your own. The original cable is a RS232/Serial-to-USB converter. This means that any device that...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

If you broke or lost the VE.Direct cable for your Victron device, you can make your own. The original cable is a RS232/Serial-to-USB converter. This means that any device that appears as an COM/serial device in the operating system will work for this purpose.

Connection

Victron vedirect cable diagram.png

Materials

This requires the following parts:

Or build one from adapters, cable and connector:

  • Sparkfun FTDI 5V RS232 adapter
  • JST-PH 2.00mm pitch 4-pin connector
  • 4 Wire cable 1m
Retrieved from "https://beta.ivc.no/wiki/index.php?title=Victron_VE_Direct_DIY_Cable&oldid=11635"