Difference between revisions of "TBS Discovery"
From ivc wiki
Jump to navigationJump to search
| Line 1: | Line 1: | ||
The Team BlackSheep (TBS) Discovery is a purpose made FPV platform, based on the DJI F450 setup. | The Team BlackSheep (TBS) Discovery is a purpose made FPV platform, based on the DJI F450 setup. | ||
* [[RC_Airplanes|Back to RC Airplanes index]] | |||
''Researched only'' | ''Researched only'' | ||
| Line 24: | Line 26: | ||
== Motors == | == Motors == | ||
* NTM 28-26A 1200 Kv 250w prop drive series motor [http://forums.openpilot.org/topic/10613-tbs-discovery-beta-build-log/page__st__180] | * NTM 28-26A 1200 Kv 250w prop drive series motor [http://forums.openpilot.org/topic/10613-tbs-discovery-beta-build-log/page__st__180] | ||
** Suggested setup: APC 10x4.7 propeller | |||
* NTM 28-30A 750kv 140w prop drive series | |||
** Suggested setup: 4S 1800 mAh | |||
* DJI 2212 920 Kv brushless motor [http://forums.openpilot.org/topic/10613-tbs-discovery-beta-build-log/page__st__80] | |||
** Suggested setup: Graupner 10x5 | |||
* Tiger MT-4006-13 740 Kv motor | |||
* RCTimer 2830-14 750 Kv outrunner motor [http://forums.openpilot.org/topic/10613-tbs-discovery-beta-build-log/page__st__160#entry95888] | * RCTimer 2830-14 750 Kv outrunner motor [http://forums.openpilot.org/topic/10613-tbs-discovery-beta-build-log/page__st__160#entry95888] | ||
== Tools == | == Tools == | ||
* [http://www.ecalc.ch/motorcalc_e.htm eCalc] - find the optimal propeller+motor combination | * [http://www.ecalc.ch/motorcalc_e.htm eCalc] - find the optimal propeller+motor combination | ||
Revision as of 16:00, 8 July 2012
The Team BlackSheep (TBS) Discovery is a purpose made FPV platform, based on the DJI F450 setup.
Researched only
My setup
Base setup
This is the basis for the quad and makes for a perfect platform to start testing equipment.
- Motor: RCTimer 2830-14 750 Kv outrunner motor with 5.0 mm collet adaptor for 3.17 mm shaft [1]
- Propellers: Gaui G-222800 10-inch propellers set (2 norm, 2 rev for GAUI 500X quad) [2]
- ESC: RCTimer 30A Brushless Programmable ESC with bare leads - Reprogrammed with RapidESC firmware, internal oscillator (not optimal)
- Alternate ESC: Hobby King F-30A Brushless Programmable ESC with bare leads - Reprogrammed with RapidESC firmware
- Flight Controller: DJI NAZA-M flight control
- Receiver: FrSky D6FR 2.4 GHz ACCST 6 channel two-way receiver
- Transmitter: Spektrum DX7 radio with FrSky DHT 2.4 GHz 60mW transmitter
- Battery: Turnigy nano-tech 3300mah 35~70C 4SP1 11.1V Lithium-ion Polymer x gram battery
Upgraded setup
- Motor: RCTimer 2830-14 750 Kv outrunner motor [3]
- Receiver: ImmersionRC EzUHF Lite 8 channel 433 MHz receiver
- Transmitter: Spektrum DX7 radio with ImmersionRC EzUHF 433 MHz transmitter
- Flight Controller: OpenPilot CopterControl flight control - limted supply
Motors
- NTM 28-26A 1200 Kv 250w prop drive series motor [4]
- Suggested setup: APC 10x4.7 propeller
- NTM 28-30A 750kv 140w prop drive series
- Suggested setup: 4S 1800 mAh
- DJI 2212 920 Kv brushless motor [5]
- Suggested setup: Graupner 10x5
- Tiger MT-4006-13 740 Kv motor
- RCTimer 2830-14 750 Kv outrunner motor [6]
Tools
- eCalc - find the optimal propeller+motor combination
