MakerBot Replicator 1

From ivc wiki
Revision as of 21:30, 2 August 2012 by Ivc (talk | contribs) (Created page with "A few steps to keep the MakerBot running smoothly and continously. == Improvements == * Add blue thread-lock to all grubscrews on all the axis to prevent them to fall out * Use ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

A few steps to keep the MakerBot running smoothly and continously.

Improvements

  • Add blue thread-lock to all grubscrews on all the axis to prevent them to fall out
  • Use Triflow lubricant or similar to all metal-to-metal mechanical motion
  • Replace the system fan with a large 80x80 mm fan to reduce noise
  • Add a adhesive label on the right side of the joy-pad to indicate the insertion point for the SD card