Line follower

From ivc wiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Line follower view.jpg

A line follower built for as part of an electronics course, ELE103 at UiA. Design and construction is done from scratch and uses only analog sensors to direct itself around course made of black tape.

Uses elements from analog sensing, digital logic, and driver circuits.

Outline

The project had the following outline:

  • An autonomous unit following a dark line on a bright background
  • Logic 1 (5V) when detector is over line, otherwise logic 0 (0V), CMOS technology
  • Motors controlled by driver circuit
  • Turn off when no line under detectors
  • Steering right/left accomplished in 3 phases; straight ahead, 5 degree, and 10 degree
  • Powered by a battery power-source

Report

Below is the corresponding report and further details. It's in norwegian but it should be possible to translate it using some online service.

Video

The video below shows how the line follower works.

Photo gallery