Difference between revisions of "Copter 6025-1"
From ivc wiki
Jump to navigationJump to search
| Line 3: | Line 3: | ||
== Specifications == | == Specifications == | ||
* Remote: Infrared, 3 channels, integrated charger, 3 band switch | * Remote: Infrared, 3 channels, integrated charger, 3 band switch | ||
** Controls: Elevator, | ** Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH) | ||
* Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer | * Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer | ||
** Cable connected left-side for charging | ** Cable connected left-side for charging | ||
* Soft cut-off on low battery | * Soft cut-off on low battery | ||
* Weight: | * Weight: 16 grams | ||
* Dimensions: 100x20x70mm (LxWxH) | * Dimensions: 100x20x70mm (LxWxH) | ||
* Main rotor diameter: 110mm | |||
== Tweaks == | == Tweaks == | ||
Revision as of 11:32, 31 January 2010
The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.
Specifications
- Remote: Infrared, 3 channels, integrated charger, 3 band switch
- Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
- Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer
- Cable connected left-side for charging
- Soft cut-off on low battery
- Weight: 16 grams
- Dimensions: 100x20x70mm (LxWxH)
- Main rotor diameter: 110mm
Tweaks
- Mount small E-flite battery between the skids
- Replace battery with higher capacity E-flite battery
- Removable battery with connector
- Unsolder from circuit and use small connectors
- Improve cooling of the motor
- Metal fins, funnel, thermal grease
- Remove spring on throttle stick
- Replace metal screws with nylon
- Use higher quality LiPo batteries
- Zippy 70 mAh 20C
- Balance weight and flight performance
Spare parts
These suppliers offer original 6025 spare parts:
