Difference between revisions of "Electric Bobby Car Hoverboard Upgrade"
From ivc wiki
Jump to navigationJump to search
| Line 20: | Line 20: | ||
* [https://larsm.org/allrad-e-bobby-car/ Larsm Allrad e-Bobby Car] - great write up and custom firmware fork | * [https://larsm.org/allrad-e-bobby-car/ Larsm Allrad e-Bobby Car] - great write up and custom firmware fork | ||
* [https://github.com/NiklasFauth/hoverboard-firmware-hack Niklas Fauth Hoverboard firmware hack] - original firmware | * [https://github.com/NiklasFauth/hoverboard-firmware-hack Niklas Fauth Hoverboard firmware hack] - original firmware | ||
== Schematics == | |||
* [[File:hoverboard_schematic_full_reverse.pdf]] - Full reverse engineered schematic of the classic hoverboard circuit board | |||
* [[File:hoverboard_schematic_simple_reverse.pdf]] - Simple schematic the circuit board | |||
Revision as of 17:48, 27 February 2019
This project puts four 350W hoverboard motors in a Big Bobby Car toy vehicle, to give it independent four wheel drive and a top speed of 29km/h with turbo activated. All controlled by two potentiometer triggers on the steering wheel.
Specifications
- Project start: January 2019
- Main controller: STM32F103 72MHz ARM Cortex-M3 core
- Flasher: ST-Link V2 Programming Unit clone
- Motors: 4x direct drive 3-phase brushless DC electric wheel hub motors, 36V 350W ea
- Tire type: non-pneumatic rubber tire, road pattern
- Tire size: 7-inch / 170 mm
- Battery: Lithium-ion rechargeable 18650-cells, 10S2P 36V 4400mAh 158.4Wh pack with XT60 connector
- Upgrade: Controller can handle 13S (48V), 12S battery upgrade easiest
- Charger: Lithium-ion charger 42V 2A 3-pin connector with built-in fan
- Upgrade: External charger for anything else
- Internal connectors: JST Sales America B4B-XH-A(LF)(SN) 2.5mm pitch
- Vehicle base type: BIG New Bobby Car Red
- Dimensions assembled: L57 x W30 x H39 cm
- Original load-bearing: 50 kg max.
Inspiration
- Larsm Allrad e-Bobby Car - great write up and custom firmware fork
- Niklas Fauth Hoverboard firmware hack - original firmware
Schematics
- File:Hoverboard schematic full reverse.pdf - Full reverse engineered schematic of the classic hoverboard circuit board
- File:Hoverboard schematic simple reverse.pdf - Simple schematic the circuit board
