Difference between revisions of "BlueSolar 100-15 True MPPT solar charge controller"
From ivc wiki
Jump to navigationJump to search
(Created page with "The BlueSolar series of charge controllers are some of the latest and most efficient MPPT controllers available. The BlueSolar 100-15 controller is based on a Freescale MC9S08...") |
(→Specs) |
||
| Line 3: | Line 3: | ||
== Specs == | == Specs == | ||
* Type: MPPT charge controller with load output | * Type: MPPT charge controller with load output | ||
* Micocontroller: Freescale MC9S08AC32 40Mhz MCU | |||
* Max. PV voltage: 100V | * Max. PV voltage: 100V | ||
* Max. PV current: 15A | * Max. PV current: 15A | ||
* Max. load current: 15A | * Max. load current: 15A | ||
* Battery voltage: 12V or 24V, auto-detecting | |||
* Battery fuse: 20A blade fuse | * Battery fuse: 20A blade fuse | ||
* Protection: Over-voltage, over-temperature (buck converter), low-battery voltage | * Protection: Over-voltage, over-temperature (buck converter), low-battery voltage cut-off, battery management | ||
* Terminals: screw terminals, max. 6mm2/10AWG | * Terminals: screw terminals, max. 6mm2/10AWG | ||
* Monitoring: Two LEDs, remote VE Direct communication cable to a computer or meter device | * Monitoring: Two LEDs, remote VE Direct communication cable to a computer or meter device | ||
* Firmware: Upgradable via VE Direct cable and software | |||
* Size: 113.9 x 100.7 x 46.9 mm | |||
Revision as of 20:45, 2 December 2016
The BlueSolar series of charge controllers are some of the latest and most efficient MPPT controllers available. The BlueSolar 100-15 controller is based on a Freescale MC9S08AC32 40MHz MCU, can handle up to 100V 15A PV installation, hence then model name. This allows up to 400W of PV on a 24V battery setup, which is pretty much for such a relatively small controller.
Specs
- Type: MPPT charge controller with load output
- Micocontroller: Freescale MC9S08AC32 40Mhz MCU
- Max. PV voltage: 100V
- Max. PV current: 15A
- Max. load current: 15A
- Battery voltage: 12V or 24V, auto-detecting
- Battery fuse: 20A blade fuse
- Protection: Over-voltage, over-temperature (buck converter), low-battery voltage cut-off, battery management
- Terminals: screw terminals, max. 6mm2/10AWG
- Monitoring: Two LEDs, remote VE Direct communication cable to a computer or meter device
- Firmware: Upgradable via VE Direct cable and software
- Size: 113.9 x 100.7 x 46.9 mm
