Audio power amplifier

From ivc wiki
Revision as of 20:38, 19 February 2011 by Ivc (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Audio amplifier view.jpg

This was a electronics course project, building an audio amplifier based around the LM1875 op-amp.

Report

Circuit

The circuit was constructed after calculating the amplification, upper and lower frequency band, according to the specifications.

Audio amplifier circuit.png

Final

This shows the final circuit, mounted to a flexi-glass plate to balance the enormous heatsink and protect the bottom traces.

Audio amplifier side.jpg

Audio amplifier overview.jpg Audio amplifier bottom.jpg

Measurements

Measuring the input and output signal using a oscilloscope will verify if the circuit is designed correctly, which it turned out to be.

Here the amplifications is about 25 (9.8V/0.4V).

Audio amplifier oscilloscope.png