MakerBot Replicator 1
From ivc wiki
Jump to navigationJump to search
A few steps to keep the MakerBot running smoothly and continously.
Improvements
- Add blue thread-lock to all grubscrews on all the axis to prevent them to fall out [1]
- Use Triflow or similar PTFE lubricant to all metal-to-metal mechanical motion [2]
- Replace the system fan with a large 80x80 mm fan to reduce noise
- Add a adhesive label on the right side of the joy-pad to indicate the insertion point for the SD card
- Remove the ABS residue from the drive gear regularly [3]
