DJI Phantom

From ivc wiki
Revision as of 13:09, 29 March 2013 by Ivc (talk | contribs)
Jump to navigationJump to search
Dji phantom kit.jpg

The DJI Phantom was released January 2013 and is a fully pre-tuned ready-to-fly (RTF) quadrotor. It has protective aerodynamic molded body with all required equipment integrated. Designed for aerial filming with a GoPro camera.

Specifications

  • Released: December 2012
  • Type: Symmetric 350mm size quadrotor
  • Airframe: Molded plastic
  • Absolute size: - mm
  • All up weight: 800 grams (incl. battery)
  • Takeoff weight: 1000-1500 grams
  • Flight controller: DJI NAZA-M
  • Transmitter: DJI 6-channel 2.4GHz 100mW transmitter
  • Receiver: DJI 2.4GHz S-Bus -93dBm receiver
  • Battery: 3S 2200 20C+ single LiPo pack with XT60 connector
    • Battery weight: 170-220 grams recommended
    • Battery cage: W34xH23xL109 mm
    • Charger: Balanced 3A Lipo charger
  • Suitable motors: 22x12 mm (Ø28x26-28mm) or 22x16 mm (Ø28x30-34mm) (recommended), 700-900KV, 150-250W
  • Motor mount arms: 16x19 mm pattern
  • Propellers: 8x5-inch 2xCW 2xCCW
  • ESC: 4x Integrated 12A 400Hz speed controllers
  • Forward speed: ~30-40 km/h
  • Flight time: 8-10 minutes
  • Product pages:
    • DJI Phantom - official product page with software upgrades and manuals
  • Similar models:

Manuals

Gear

Propellers

  • Gemfan 9x5-inch Carbon fiber props - 8mm Hub for DJI motors

Motors

Batteries

  • APLUS Extreme 2200mAh-65C 3S1P 11.1v Lipo pack - Quality pack
  • Hyperion G3 CX 11.1V 3S 2500mah 25C Lipo pack

Tips and tricks

Shops

References