TBS Caipirinha

THe TBS Caipirinha is a small wing specially design for FPV use.

Specifications

• Released: February 2013, Shipped March 2013
• Also known as: TBS Caipi, TBS Capy
• Type: Powered medium sized flying FPV wing
• Airframe: Molded EPP (Expanded Polypropylene) foam
• Wingspan: 34-inch / 850 mm
• Wing area: -
• Length: -
  • Root chord: -
  • Tip chord: -
  • Sweep: -
• All up weight: 600-650 grams incl. RC and FPV gear
• Center of gravity: - from front
• Elevon travel range (radio programmable):
  • Elevator: +-15 mm
  • Aileron: +-10 mm
• Battery: 2S 3300mAh 30C+ LiPo pack or 3S 2200mAh 30C+, with JST-connector, Mini Deans T-connector or EC2-connector
  • Battery weight: 150-250 grams recommended
  • Battery compartment: W47xH17xL135 mm - unconfirmed
• Motors type: 22x06 mm (Ø28x18-23mm), 22x12 mm (Ø28x26-28mm) recommended
• Propellers: 8x5-inch on 2000KV motor recommended
• Speed controller: 12-30A regular switched ESC
• Payload capacity: 100-250 grams - drive train dependent - unconfirmed
• Flight speed: -
• Flight time: ~35 minutes
• Flight range: ~10 km on TBS equipment
• Recommended flying area: minimum 250x250 meters
• Reinforcement: Optional fiber glass spars, two 2x530mm wing spars, one 2x160 mm ribbon bars under motor mount - unconfirmed
• Accessories: Plywood light elevons, plywood motor mount, plywood GoPro mount, push rods, bunny-ear and symmetrical winglets, negative foam inserts
• Product page: TBS Caipirinha