T-Rex 250 Parts

Below is a lost of all the parts and tools I needed to build the T-Rex 250.

Initial list - April 2009

• 1x T-Rex 250 Super Combo
• 1x Spektrum DX7 DSM 7CH AR7100 Mode 1 heli transmitter
• 1x Spektrum AR6100e receiver
• 1x Bantam BC6 + EAC129 Outrage adapter
• 1x TX/RX Spektrum charging cables
• 3x Deans Ultra Male-Female Pack
• 1x Align JST Male Connector(18A w.g.) E11169A
• 1x Align JST Female Connector(18A w.g.) E11170A
• 1x Align 250 Ball Link Plier H25070
• 1x Dial Pitch Gauge K10390A-1
• 1x Swashplate Leveler Tool SILVER - TREX 250
• 1x ZAP Z-42 ThreadLock Blue 6ml
• 1x ZAP-A-GAP CA+ (Green Label) 1oz (28.3g)
• 1x Silicon diffoil 3.000 thin-medium 35ml
• 1x Robbe S1315 Klueber 7 Grease
• 2x Tri Flow Grease 1/4oz. Bottle
• 1x Tri Flow Lube 2oz Bottle
• 1x Deluxe Long Nose Plier/Cutter Tool
• 1x Deluxe Precision Diagonal Cutter Tool
• 1x Wire 12/13awg 2.05/1.80mm blue/red silicone
• 1x MIP Thorp Hex Driver .9mm 9012
• 1x Deluxe Lexan Curved Scissor
• 1x Ball Link Sizer 3.5mm - Blade CP/PRO MH-T003
• 1x Servo Wire Braided Sleeving Wrap Kit - 1/4"
• 1x Servo Wire Braided Sleeving Wrap Kit - 1/8"
• 1x Thunder Power 910mAh 3SP1 11.1V Pro-lite Lipo V2 TP910-3S
• 1x Outrage XP25 3S1P 860mah 25C 70g battery - JST and FP/TP
• 2x LiPo Safe Bag
• 1x Velcro Hook & Loop 1X6