Difference between revisions of "Audio power amplifier"
From ivc wiki
Jump to navigationJump to search
| Line 2: | Line 2: | ||
== Report == | == Report == | ||
* Project report: [http://beta.ivancover.com//electronics/ele103_effektforsterker_for_lyd.pdf Effektforsterker for lyd] | * Project report: [http://beta.ivancover.com//electronics/ele103_effektforsterker_for_lyd.pdf Effektforsterker for lyd] - In norwegian, pdf | ||
== Circuit == | == Circuit == | ||
Revision as of 12:56, 17 May 2010
This was a electronics course project, building an audio amplifier based around the LM1875 op-amp.
Report
- Project report: Effektforsterker for lyd - In norwegian, pdf
Circuit
The circuit was constructed after calculating the amplification, upper and lower frequency band, according to the specifications.
Final
This shows the final circuit, mounted to a flexi-glass plate to balance the enormous heatsink and protect the bottom traces.
Measurements
Measuring the input and output signal using a oscilloscope will verify if the circuit is designed correctly, which it turned out to be.
Here the amplifications is about 25 (9.8V/0.4V).
