Difference between revisions of "Audio power amplifier"
From ivc wiki
Jump to navigationJump to search
(→Final) |
|||
| Line 12: | Line 12: | ||
[[Image:Audio_amplifier_overview.jpg|400px]] [[Image:Audio_amplification_bottom.jpg|400px]] | [[Image:Audio_amplifier_overview.jpg|400px]] [[Image:Audio_amplification_bottom.jpg|400px]] | ||
== Measurements == | |||
Measuring the input and output signal using a oscilloscope will verify if the circuit is designed correctly, which it turned out to be. | |||
[[Image:Audio_amplfifier_oscilloscope.png|400px]] | |||
== Report == | == Report == | ||
* Project report: [http://beta.ivancover.com//electronics/ele103_effektforsterker_for_lyd.pdf Effektforsterker for lyd] (Norwegian) | * Project report: [http://beta.ivancover.com//electronics/ele103_effektforsterker_for_lyd.pdf Effektforsterker for lyd] (Norwegian) | ||
Revision as of 13:07, 14 March 2010
This was a electronics course project, building an audio amplifier based around the LM1875 op-amp.
Circuit
The circuit was constructed after calculating the amplification, upper and lower frequency band, according to the specifications.
File:Audio amplfifier circuit.png
Final
This shows the final circuit, mounted to a flexi-glass plate to balance the enormous heatsink and protect the bottom traces.
File:Audio amplfifier side.jpg
File:Audio amplification bottom.jpg
Measurements
Measuring the input and output signal using a oscilloscope will verify if the circuit is designed correctly, which it turned out to be.
File:Audio amplfifier oscilloscope.png
Report
- Project report: Effektforsterker for lyd (Norwegian)
