Difference between revisions of "Copter 6025-1"

From ivc wiki
Jump to navigationJump to search
Line 69: Line 69:
* E-flite Blade mCX [http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLH2200] [http://www.rcgroups.com/forums/showpost.php?p=14200030&postcount=159]
* E-flite Blade mCX [http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLH2200] [http://www.rcgroups.com/forums/showpost.php?p=14200030&postcount=159]
* Nine Eagles Solo [http://www.nineeagle.com/en/p.asp?pid=35] - Revell Proto CX (rebranded) [http://www.revell.com/radio-control/rmxe6059.html]
* Nine Eagles Solo [http://www.nineeagle.com/en/p.asp?pid=35] - Revell Proto CX (rebranded) [http://www.revell.com/radio-control/rmxe6059.html]
* Sanhuan Copter 6023-1
* Sanhuan Copter 6023-1 [http://www.rc-fever.com/sanhuan-helicopter-copter-60231-rtf-c-337_180_556.html]
** Sanhuan Coper 6020-1 - dash one indicates gyro
** Sanhuan Coper 6020-1 [http://www.rc-fever.com/sanhuan-helicopter-copter-60201-rtf-c-337_180_550.html.html] - dash one denotes gyro


== References ==
== References ==

Revision as of 14:49, 4 February 2010

Helicopter 6025-1 hand.jpg
Helicopter 6025-1 red.jpg
Helicopter 6025-1 yellow leftside.jpg
Helicopter 6025-1 inside.jpg
Helicopter 6025-1 case.jpg

The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.

Specifications

  • Motor: 2 solid motors for coaxial, 1 tail motor for elevation
  • Remote: Infrared, 3 channels, integrated charger, 3 band switch
    • Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
  • Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer
    • Charging connection on left-side
    • Charging: 20 minutes
    • Runtime: approx. 5 minutes
  • Soft cut-off on low battery
  • Weight: 16 grams
  • Dimensions: 113x22x60mm (LxWxH)
  • Main rotor diameter: 110mm

Sanhuan product page:

Tweaks

  • Mount small E-flite battery between the skids
    • Replace battery with higher capacity E-flite battery [1]
  • Removable battery with connector
    • Unsolder from circuit and use small connectors [2] [3] [4]
  • Improve cooling of the motors
    • Metal fins, funnel, thermal grease
  • Remove spring on throttle stick
  • Replace metal screws with nylon
  • Use higher quality LiPo batteries
  • Connect batteries in parallel for double capacity
    • E-flite BMCX/MSR 110mAh 1S 3.7V 3.4 grams [5]
    • OUTRAGE NRG15 3.7V 130mAH 15C [6]
    • ZIPPY 70mAh 20C 1S 1.5 grams [7]
    • ZIPPY 100mAh 20C 1S 3.0 grams [8]
    • ZIPPY Flightmax 138mAh-V2 1S 10C 3.7 grams [9]
  • Balance weight and flight performance
  • Disable LED lights
  • Swap controller trim-pot polarization
  • Program a better controller
  • Different size flybar weights

Spare parts

List of spare parts and accessories for the 6025-1:

  • Copter MINIX Heli 6025 70mAh Lipo Battery [10]
  • Copter MINIX Heli 6025 Landing Skid [11]
  • Copter MINIX Heli 6025 Tail Main Blade Set [12] [13]
  • Copter MINIX 6025 Tail Rotor Blades [14] [15]

Accessories:

  • Copter V-MAX/MAX-Z 6020 USB Cable [16]
  • RC Pro X Aluminium Box for SanHuan Copter Mini X 6025-1 [17]
  • 3DPro AluSafe Portable Aluminium Case for Walkera 4#3A/B, CB100 [18] - little bigger

These suppliers offer original 6025 spare parts:

Similar mini helicopers

  • Nine Eagles Free Spirit Micro 210A [19]
  • E-flite Blade mSR [20]
  • SanHuan Copter 6023-1 [21] [22]
  • E-flite Blade mCX [23] [24]
  • Nine Eagles Solo [25] - Revell Proto CX (rebranded) [26]
  • Sanhuan Copter 6023-1 [27]
    • Sanhuan Coper 6020-1 [28] - dash one denotes gyro

References

Retrieved from "https://beta.ivc.no/wiki/index.php?title=Copter_6025-1&oldid=6546"