Difference between revisions of "Kites"
From ivc wiki
Jump to navigationJump to search
| Line 42: | Line 42: | ||
* [http://www.revkites.com/main/ Revolution Kites] | * [http://www.revkites.com/main/ Revolution Kites] | ||
* [http://www.simian-studios.ca/kites.html Simian Studios Kites] | * [http://www.simian-studios.ca/kites.html Simian Studios Kites] | ||
* [http://club.aerialis.no/cms/modules/wfsection/article.php?page=1&articleid=4 Tips og Hint: Hvilken drage skal jeg velge?] | |||
Revision as of 21:09, 11 March 2008
Kites
- Prism Quantum
- Revolution Supersonic
- Revolution Shockwave
- Revolution Power Blast 2-4
Sail
- Mylar
- Ripstop Nylon
Rods
- Carbon
- Fiberglass
Terminology
- Winder - To gather and store the line
- Leading Edges - Outer-top rod holding the sail straight
- Leading Edge Fittings - Connecting piece on the leading edge for the upper and lower spreader rods
- Trailing edge - Back-end of the sail, behind the lower spreader
- Spreaders - Rods connecting via the leading edge fittings and holding the wings erect and seperated. Lower spreader is held perpendicular to the spine via a T connector
- Spine - Vertical rod in the center of the sail
- Stand-offs - Flexible rods holding the trailing edge away from the lower spreader
- Sail Clips - Connecting pieces on the wings for the stand-off rods
- Wing-tip Knock - Notch on the end of the leading edge rods to hold back and tension the sail
- Bridle - Towing crosspoint connecting the main line via short legs to the kite
- Towing / tow point - End of the bridle where the mail line is connected
- Diamond kite - Classic one-line kite, formed like a diamond
