Difference between revisions of "HP ProLiant DL380 G5 BIOS Updates"
| Line 22: | Line 22: | ||
To update iLO2, configure Java (in the Java Control Panel) to use the following TLS 1.0 settings, open Firefox, go to Administration -> iLO2 Firmware and pick the firmware file. Click 'Send firmware image' and the progress bar should show all the passes for retreiving, verifing and flashing. | To update iLO2, configure Java (in the Java Control Panel) to use the following TLS 1.0 settings, open Firefox, go to Administration -> iLO2 Firmware and pick the firmware file. Click 'Send firmware image' and the progress bar should show all the passes for retreiving, verifing and flashing. | ||
[[Image:HP_ProLiant_iLO2_Java_Settings.png| | [[Image:HP_ProLiant_iLO2_Java_Settings.png|200px]] [[Image:HP_ProLiant_iLO2_Firmware.png|300px]] | ||
* 2.29 | * 2.29 | ||
Revision as of 20:17, 21 February 2017
The DL380 G5 BIOS updates are hard to get hold of, so get them below instead.
Flash utility
Use the USB Flash Key tool to make a USB flash drive as a base.
- [Flash tool]
BIOS updates
- [Download all BIOS updates]
To use any of the following updates, make the above flash drive and replace the P56.XXX file on the drive with the bios file you want to flash. Insert the USB drive and reboot into the ROMPAQ.exe flash tool. You can use iLO2 Remote Console in Firefox to connect to the server and perform the update.
The following list are all the BIOS updates as of February 2017 for this rack server.
- 08/16/2015
iLO2 firmware updates
To update iLO2, configure Java (in the Java Control Panel) to use the following TLS 1.0 settings, open Firefox, go to Administration -> iLO2 Firmware and pick the firmware file. Click 'Send firmware image' and the progress bar should show all the passes for retreiving, verifing and flashing.
- 2.29
