Difference between revisions of "Server Rack"
From ivc wiki
Jump to navigationJump to search
| Line 55: | Line 55: | ||
== Possible Server Configuration == | == Possible Server Configuration == | ||
* Nestus - Dual Xeon - | * Nestus - Dual Xeon - 1U | ||
* Elitus - Dual Celeron - | * Elitus - Dual Celeron - 2U | ||
* Stellus - Single K6-2 - | * Stellus - Single K6-2 - 2U | ||
* Server3 - Singel P4 - | * Server3 - Singel P4 - 4U | ||
== References == | == References == | ||
Revision as of 23:43, 25 March 2010
Chieftec UNC-110S-B Open
Lian Li IP101U Open
Supermicro SC811T-420 Open
Lian Li IP20 Open
Chieftec UNC-210S-B Front
Chieftec UNC-210S-B Open
I&S EYE2830BK Front
I&S EYE2830BK Open
AIC RMC2LXP Front
AIC RMC2LXP Open
I&S EYE4860BK Front
I&S EYE4860BK Open
Lian Li IP20 Open
I'm looking for server rack cases that I can use to convert midi-tower servers into racks for remote co-location hosting, e.g 1U, 2U, 3U form factor. It's recommended to buy a pre-built bare-bone or complete server to ensure good airflow and stability. Build-it-yourself cases usually cut corners in order to make it compatible with all the motherboard variations out there.
Cases
One rack unit (U) is approximately 4.45 cm (1.75 in).
- Height: 1U = 4.45 mm, 2U = 8.9 mm, 3U = 13.35 mm, 4U = 17.8 mm, 5U = 22.25 mm
- Width: 19 inches, 482.6 mm
1U
- Chieftec UNC-110S-B 300W ATX [1] [2]
- Lian Li IP101U [3]
- Supermicro SC811T-420/B (Xeon ready) [4] [5] [6]
- Lian Li IP20 [7]
2U
- Chieftec UNC-210S-B 360W ATX [8] [9]
- Image & Shapetek EYE2830BK [10] [11] [12]
- (Image & Shapetek EYE2831BK [13] [14] [15])
- Lian Li IP20 [16]
- AIC RMC2L-XP [17] [18]
4U
Accessories
- Zippy ZIP2U6300P 300W 2U PSU [21]
- Fortron/Source FSP300-601U 300W 1U PSU [22]
- Fortron/Source FSP460-601U 460W EPS 1U PSU (Xeon ready) [23]
Possible Server Configuration
- Nestus - Dual Xeon - 1U
- Elitus - Dual Celeron - 2U
- Stellus - Single K6-2 - 2U
- Server3 - Singel P4 - 4U
