Difference between revisions of "Copter 6025-1"

From ivc wiki
Jump to navigationJump to search
Line 23: Line 23:
* [http://www.sanhuantoy.com/?p=16 Sanhuan Copter 6025-1 Mini-X]
* [http://www.sanhuantoy.com/?p=16 Sanhuan Copter 6025-1 Mini-X]


== Tweaks ==
== Possible tweaks ==
* Mount small E-flite battery between the skids
* Mount small E-flite battery between the skids
** Replace battery with higher capacity E-flite battery [http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLB1101S]
** Replace battery with higher capacity E-flite battery [http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLB1101S]
Line 44: Line 44:
* Program a better controller
* Program a better controller
* Different size flybar weights
* Different size flybar weights
* Swap the left and right control stick [http://www.huaxiangtoys.com/Eng/ShowProduct.aspx?ID=246]
** For Throttle and Yaw on left and Elevation on right


== Spare parts ==
== Spare parts ==

Revision as of 15:01, 4 February 2010

Helicopter 6025-1 hand.jpg
Helicopter 6025-1 red.jpg
Helicopter 6025-1 yellow leftside.jpg
Helicopter 6025-1 inside.jpg
Helicopter 6025-1 case.jpg

The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.

Specifications

  • Motor: 2 solid motors for coaxial, 1 tail motor for elevation
  • Remote: Infrared, 3 channels, integrated charger, 3 band switch
    • Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
  • Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer
    • Charging connection on left-side
    • Charging: 20 minutes
    • Runtime: approx. 5 minutes
  • Soft cut-off on low battery
  • Weight: 16 grams
  • Dimensions: 113x22x60mm (LxWxH)
  • Main rotor diameter: 110mm

Sanhuan product page:

Possible tweaks

  • Mount small E-flite battery between the skids
    • Replace battery with higher capacity E-flite battery [1]
  • Removable battery with connector
    • Unsolder from circuit and use small connectors [2] [3] [4]
  • Improve cooling of the motors
    • Metal fins, funnel, thermal grease
  • Remove spring on throttle stick
  • Replace metal screws with nylon
  • Use higher quality LiPo batteries
  • Connect batteries in parallel for double capacity
    • E-flite BMCX/MSR 110mAh 1S 3.7V 3.4 grams [5]
    • OUTRAGE NRG15 3.7V 130mAH 15C [6]
    • ZIPPY 70mAh 20C 1S 1.5 grams [7]
    • ZIPPY 100mAh 20C 1S 3.0 grams [8]
    • ZIPPY Flightmax 138mAh-V2 1S 10C 3.7 grams [9]
  • Balance weight and flight performance
  • Disable LED lights
  • Swap controller trim-pot polarization
  • Program a better controller
  • Different size flybar weights
  • Swap the left and right control stick [10]
    • For Throttle and Yaw on left and Elevation on right

Spare parts

List of spare parts and accessories for the 6025-1:

  • Copter MINIX Heli 6025 70mAh Lipo Battery [11]
  • Copter MINIX Heli 6025 Landing Skid [12]
  • Copter MINIX Heli 6025 Tail Main Blade Set [13] [14]
  • Copter MINIX 6025 Tail Rotor Blades [15] [16]

Accessories:

  • Copter V-MAX/MAX-Z 6020 USB Cable [17]
  • RC Pro X Aluminium Box for SanHuan Copter Mini X 6025-1 [18]
  • 3DPro AluSafe Portable Aluminium Case for Walkera 4#3A/B, CB100 [19] - little bigger

These suppliers offer original 6025 spare parts:

Similar mini helicopers

  • Nine Eagles Free Spirit Micro 210A [20]
  • E-flite Blade mSR [21]
  • SanHuan Copter 6023-1 [22] [23]
  • E-flite Blade mCX [24] [25]
  • Nine Eagles Solo [26] - Revell Proto CX (rebranded) [27]
  • Sanhuan Copter 6023-1 [28]
    • Sanhuan Coper 6020-1 [29] - dash one denotes gyro version [30]

References