WEP Cracking

WEP is infamously known as the totally broken wireless security protocol. Severe misapplication of cryptographic primitives were discovered in 2001 and after several cascading discoveries afterwards, it's now possible to crack a WEP protected network in under a minute. WPA is the successor to WEP and features a better but not perfect security protocol.

Background

There are now many sources that describe the vulnerability in detail and APR replay to generate traffic, but this is a short summary. For an throughout explaination on how WEP is implemented and the vulnerabilities, see the link below.

Types of attacks:

• Passive attacks to decrypt traffic based on statistical analysis.
• Active attack to inject new traffic from unauthorized mobile stations, based on known plaintext.
• Active attacks to decrypt traffic, based on tricking the access point.
• Dictionary-building attack that, after analysis of about a day's worth of traffic, allows real-time automated decryption of all traffic.

Original discoveries and papers:

• 2001: (In)security of the WEP algorithm by Nikita Borisov, Ian Goldberg, and David Wagner
• 2001: Intercepting Mobile Communications:The Insecurity of 802.11 paper by Nikita Borisov,Ian Goldberg and David Wagner
• 2001: Weaknesses in the Key Scheduling Algorithm of RC4 by Fluhrer, Mantin, and Shamir
• 2005: Attacks on RC4 by Andreas Klein (In German)
• 2007: Breaking 104 bit WEP in less than 60 seconds by Erik Tews, Ralf-Philipp Weinmann, and Andrei Pyshkin
• 2008: Practical attacks against WEP and WPA (TMS, KoreK, PWTW attacks) by Martin Beck

Way of attack

The following way is current the most efficient method to crack a WEP protected network to find its key. The attack can be performed in under a minute.

• WEP encryption:

1. 24-bit unencrypted Initialization Vector + 104-bit key (13 characters/bytes), 128-bit key
2. Used to generate linear RC4 cipher stream, RC4(IV, Key)
3. XOR the message using cipher stream
4. Encrypted network frame

• ARP replay:

1. On the basis that the first 12-bytes of ARP packets always stays the same
2. De-authenticate clients connected to the Access Point or send a fake authentication attack, creating an ARP request
3. Capture this ARP packet (encrypted)
4. Continuously re-inject ARP packet back to into the network to stimulate traffic (it's a boardcast packet)
5. Capture 10-30 000 ARP (and other data) packets

• Key attack:

1. Detect reuse of Initialization Vectors (collisions), only 2^24 possibilities
2. Reverse XOR on first 2-bytes on all packets (KoreK) and 12-bytes on well-known ARP packets
3. 12-bytes of the RC4 stream cipher is revealed for that specific frame (Initialization Vector + RC4 stream cipher)
4. Build table of Initialization Vectors and RC4 stream cipher pieces
5. Use table to gain a statistical factor for each key byte (13 bytes, 104-bit) using the FMS RC4, KoreK, Klein, and the latest PTW attack.
6. Run trails to test key decryption

Practical attack

This will show how easy it is to attack a WEP protected network. They key length does not matter and it can be done using regular customer-grade equipment.

Tools

All the necessary utilities are included in the Aircrack-ng suite.

• Monitor and mode setting tools:
  • airmon - Enable monitor mode, find wireless networks, and capture frames
  • kismet - Set adapter monitor mode, survey, and capture frames
• airodump - Capture raw frames, more specifically IVs, saves to *.cap files
• aireplay - Inject frames, different attack modes, fake authentication, ARP re-injection
• aircrack - WEP/WPA/WPA2 key cracking program

Prepare adapter

I use a Alfa WU30GA adapter. It has 500 mW power output which allows for stronger signal and longer range (but also more noise).

Change the MAC address and set the adapter in monitor mode.

iwconfig (find adapter interface)
ifconfig [interface] down
airmon-ng stop [interface]
macchanger --mac 00:11:22:33:44:55 [interface] (or your own random MAC address, make something easy to remember)
airmon-ng start [interface]

Screenshot:

Find wireless network

Find the network you want to pentest using either Kismet or airodump. I'll use the latter one here. Airomon-ng will start in interactive mode and start channel hopping (1-14).

Look for networks using WEP encryption under the ENC moniker. The PWR level should be above 4-5 to get a working connection. Make a note of the BSSID and CHannel (ctrl+c to exit and mark the text). In Linux use shift+insert to paste the clipboard content.

Here I'll concentrate on the dlink network, on channel 3, BSSID 00:24:01:34:0E:23.

airodump-ng [interface]

Screenshot:

Start capturing

With the capture process running in the background, all encrypted traffic going across the specific Access Point will be saved to (filename).cap for later reference. The content will be used to filter out the IVs and cracking the key using aircrack-ng (PTW method).

airodump-ng --write dlink --bssid 00:24:01:34:0E:23 --channel [interface]

Screenshot:

Fake authenticate

Now, open a new terminal to perform a fake authentication. The Access Point will create an ARP request that we capture.

aireplay-ng --fakeauth 0 -a 00:24:01:34:0E:23 -e dlink -h 00:11:22:33:44:55 [interface]

Alternatively use '-1 0' instead of '--fakeauth 0' for short.

When it's done, it should report Authentication successful' and Association successful.

Screenshot:

Packet re-injection

This is the part where traffic is generated by injecting ARP requests into the network. The Access Point is forced to answer with a new ARP requests and thus a different IVs that we capture.

aireplay-ng --arpreplay -b 00:11:22:33:44:55 [interface]

Alternatively use '-3' instead of '--arpreplay' for short.

Screenshot:

After a few seconds, the Access Point will at random send a new ARP request and aireplay will begin to re-inject the frame. The numbers should start to rapidly build up. After 20-30 000 read ARP packets it's safe to cancel the replay. Hopefully enough IVs has been captured to begin cracking the key.

Screenshot:

Crack key

It's interesting how the key is cracked. The frame is first reversed XOR'ed to reveal a small part of the RC4 stream cipher, a table is build of IVs and stream ciphers, statistical and algorithmic methods (PTW's way) are used to predict the missing RC4 bytes to further decipher the key using the public IVs.

aircrack-ng -b 00:24:01:34:0E:23 dlink-01.cap

This process can also run in parallel to the aireplay to crack the key in pseudo real-time. In this instance it was a 40-bit key, relatively little time to crack (near instantly).

Screenshot:

References

• How to Crack a Wi-Fi Network's WEP Password with BackTrack
• SpoonWEP for Noob
• Part 10: WPA-PSK Cracking with a dictionary attack in Backtrack 3
• Cracking WEP Using Backtrack: A Beginner’s Guide
• Remote-Exploit Backtrack
• Cracking WPA FAST with video cards
• Wireless Security Gabe Rudy
• Cracking WEP and WPA Wireless Networks