Difference between revisions of "Electric Bobby Car Build"
From ivc wiki
Jump to navigationJump to search
(Created page with "This is the electric motor upgrade build log of a Bobby Car using two Hoverboard. The end result will have four motors, one per wheel, two Xbox 360 potentiometers as throttle...") |
|||
| Line 24: | Line 24: | ||
== References == | == References == | ||
* [https://larsm.org/allrad-e-bobby-car/ Larsm Allrad e-Bobby Car] - great write up and custom firmware fork | |||
* [https://github.com/NiklasFauth/hoverboard-firmware-hack Niklas Fauth Hoverboard firmware hack] - original firmware | |||
** [https://media.ccc.de/v/gpn18-95-howto-moving-objects CCC GPN18 HowTo: Moving Objects] - great talk | |||
** [https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter Build Instruction: TranspOtter] - Another build, lots of helpful pictures | |||
* [https://figch.de/index.php?nav=bobbycar Fisch's detailed build guide] - great documentation of the assembly | |||
** [https://figch.de/index.php?nav=bobbycar_trailer Fisch's trailer build] - trailer for the Bobby Car | |||
* [https://github.com/Jan--Henrik/hoverboard-breakout Jan Henrik breakout boards] - PCBs for easy connection to serial and Nunchuck | |||
Revision as of 10:20, 7 December 2019
This is the electric motor upgrade build log of a Bobby Car using two Hoverboard. The end result will have four motors, one per wheel, two Xbox 360 potentiometers as throttle and brake on the stock steering wheel, and two push buttons to turn on and off each controller separately (e.g. FWD, RWD, AWD). Inside the Bobby Car cavity, the controllers, battery, and cabling will reside.
The controllers will be flashed to a new firmware developed by Larsmm which is a fork of NiklasFauth original base.
Base preparation
Wheels
Rear wheels
Front wheels
Steering wheel
Power buttons
Motors
Controllers
Battery
Flash firmware
References
- Larsm Allrad e-Bobby Car - great write up and custom firmware fork
- Niklas Fauth Hoverboard firmware hack - original firmware
- CCC GPN18 HowTo: Moving Objects - great talk
- Build Instruction: TranspOtter - Another build, lots of helpful pictures
- Fisch's detailed build guide - great documentation of the assembly
- Fisch's trailer build - trailer for the Bobby Car
- Jan Henrik breakout boards - PCBs for easy connection to serial and Nunchuck
