Difference between revisions of "Victron VE Direct DIY Cable"
From ivc wiki
Jump to navigationJump to search
| Line 26: | Line 26: | ||
* [https://www.victronenergy.com/support-and-downloads/software#victronconnect-app Victron software downloads] | * [https://www.victronenergy.com/support-and-downloads/software#victronconnect-app Victron software downloads] | ||
== Future == | |||
The next project is to try to use a Bluetooth LE serial adapter and try to make it work like a VE.Direct Bluetooth smart dongle. | |||
Revision as of 01:10, 30 November 2016
If you broke or lost the VE.Direct cable for your Victron device, you can make your own. The original cable is a RS232/Serial-to-USB converter. This means that any device that appears as an COM/serial device in the operating system will work for this purpose.
Connection
Materials
This requires the following parts:
- Adafruit FTDI 5V 1m adapter cable
- JST-PH 2.00mm pitch 4-pin with wires
Or build one from adapters, cable and connector:
- Sparkfun FTDI 5V RS232 Mini-USB adapter
- JST-PH 2.00mm pitch 4-pin connector
- 4 Wire cable 1m
Software
For Windows, download the USB drivers and install VConnect:
For Mac, just download and install VConnect:
Future
The next project is to try to use a Bluetooth LE serial adapter and try to make it work like a VE.Direct Bluetooth smart dongle.
