Difference between revisions of "TBS Caipirinha"

From ivc wiki
Jump to navigationJump to search
Line 31: Line 31:
* Accessories: Plywood light elevons, plywood motor mount, plywood GoPro mount, push rods, bunny-ear and symmetrical winglets, negative foam inserts
* Accessories: Plywood light elevons, plywood motor mount, plywood GoPro mount, push rods, bunny-ear and symmetrical winglets, negative foam inserts
* Product page: [http://www.team-blacksheep.com/caipirinha TBS Caipirinha]
* Product page: [http://www.team-blacksheep.com/caipirinha TBS Caipirinha]
== Setups ==
=== TBS default setup ===
This is the default TBS setup offered on their website.
* '''Motors:''' TBS branded 2000KV
* '''Propellers:''' Graupner E-Prop 8x5-inch propeller
* '''ESCs:''' TBS branded 12A
* '''Transmitter:''' Futaba/Spektrum/JR/Graupner 6-8-channel radio with ImmersionRC EzUHF 433 MHz 200mW/600mW transmitter module
* '''Receiver:''' ImmersionRC EzUHF 8-channel or 4-channel 433 MHz diversity receiver
* '''Battery:''' TBS 2200mAh 2S 35C branded KYPOM KT3300/35-2S Lipo battery pack
=== TBS default setup ===
And the default FPV setup offered by TBS.
* '''FPV camera:''' TBS69 FPV camera
* '''HD camera:''' GoPro HD Hero3 camera
* '''Video transmitter:''' Lawmate TM-240500-LM 2.4GHz transmitter - [[Lawmate_Transmitter_Mods|modded]]
** '''Antenna:''' Stock 3dBi dipole antenna
* '''Video receiver:''' Lawmate RX-2460CK 2.4GHz receiver - [[Lawmate_Transmitter_Mods|modded]]
** '''Antenna:''' TBS 2.4GHz 11dBi 10-element yagi
* '''Power management:''' TBS Core video- and power-controller with 50A current sensor
* '''Goggles:''' FatShark Dominator FPV goggles
* '''Other:''' OEM 3S 2200mAh ground station batteries, custom-made power cables, composite video splitter

Revision as of 18:54, 21 February 2013

The TBS Caipirinha is a small wing released by Team BlackSheep purposely designed for FPV use. It can be flown anywhere and the light weight makes it resilient to crashes. Great wing to get into FPV.

Specifications

  • Released: February 2013, Shipped March 2013
    • Also known as: TBS Caipi, TBS Capy
  • Type: Powered medium sized flying wing
  • Airframe: Molded EPP (Expanded Polypropylene) foam
  • Wingspan: 34-inch / 850 mm
  • Wing area: -
  • Length: -
    • Root chord: -
    • Tip chord: -
    • Sweep: -
  • All up weight: 600-650 grams incl. RC and FPV gear
  • Center of gravity: - from front
  • Elevon travel range (radio programmable):
    • Elevator: +-15 mm
    • Aileron: +-10 mm
  • Battery: 2S 3300mAh 30C+ LiPo pack or 3S 2200mAh 30C+, with JST-connector, Mini Deans T-connector or EC2-connector
    • Battery weight: 150-250 grams recommended
    • Battery compartment: W47xH17xL135 mm - unconfirmed
  • Motors type: 22x06 mm (Ø28x18-23mm), 22x12 mm (Ø28x26-28mm) recommended
  • Propellers: 8x5-inch on 2000KV motor recommended
  • Speed controller: 12-30A regular switched ESC
  • Payload capacity: 100-250 grams - drive train dependent - unconfirmed
  • Flight speed: -
  • Flight time: ~35 minutes
  • Flight range: ~10 km on TBS equipment
  • Recommended flying area: minimum 250x250 meters
  • Reinforcement: Optional fiber glass spars, two 2x530mm wing spars, one 2x160 mm ribbon bars under motor mount - unconfirmed
  • Accessories: Plywood light elevons, plywood motor mount, plywood GoPro mount, push rods, bunny-ear and symmetrical winglets, negative foam inserts
  • Product page: TBS Caipirinha

Setups

TBS default setup

This is the default TBS setup offered on their website.

  • Motors: TBS branded 2000KV
  • Propellers: Graupner E-Prop 8x5-inch propeller
  • ESCs: TBS branded 12A
  • Transmitter: Futaba/Spektrum/JR/Graupner 6-8-channel radio with ImmersionRC EzUHF 433 MHz 200mW/600mW transmitter module
  • Receiver: ImmersionRC EzUHF 8-channel or 4-channel 433 MHz diversity receiver
  • Battery: TBS 2200mAh 2S 35C branded KYPOM KT3300/35-2S Lipo battery pack

TBS default setup

And the default FPV setup offered by TBS.

  • FPV camera: TBS69 FPV camera
  • HD camera: GoPro HD Hero3 camera
  • Video transmitter: Lawmate TM-240500-LM 2.4GHz transmitter - modded
    • Antenna: Stock 3dBi dipole antenna
  • Video receiver: Lawmate RX-2460CK 2.4GHz receiver - modded
    • Antenna: TBS 2.4GHz 11dBi 10-element yagi
  • Power management: TBS Core video- and power-controller with 50A current sensor
  • Goggles: FatShark Dominator FPV goggles
  • Other: OEM 3S 2200mAh ground station batteries, custom-made power cables, composite video splitter