Difference between revisions of "FPGA remote controlled vehicle"
From ivc wiki
Jump to navigationJump to search
(New page: A large project with more depth in terms of analog circuits and digital logic. The assignment was part of an electronics course and was given in the first few weeks of the semester. == Ou...) |
m (moved Remote controlled unit to FPGA remote controlled unit) |
(No difference)
| |
Revision as of 19:46, 19 February 2011
A large project with more depth in terms of analog circuits and digital logic. The assignment was part of an electronics course and was given in the first few weeks of the semester.
Outline
The following specifications was given and everything outside of this was up to us:
- Remote controlled unit with two wheels, one DC-motor each
- Direction of the unit determined by the speed of the motors
- Front wheel spinning free
- Speed and direction is adjusted by two potentiometers on the remote
- Switch to indicate Start/stop
- Communication wireless over Xbee modules
- Unit built by discrete components and the logic on a development board
- Speed adjusted by a PWM-signal for efficiency
Report
This is the report consisting of all the details, unfortunately it's in Norwegian but the pictures do the tell part of the story.
