Difference between revisions of "Copter 6025-1"

From ivc wiki
Jump to navigationJump to search
Line 1: Line 1:
[[Image:helicopter_6025-1_red.jpg|275px|right]][[Image:helicopter_6025-1_hand.jpg|275px|right]]The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.
[[Image:helicopter_6025-1_hand.jpg|280px|right]]
[[Image:helicopter_6025-1_red.jpg|280px|right]]
The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.


== Specifications ==
== Specifications ==
[[Image:helicopter_6025-1_inside.jpg|300px|right]]
[[Image:helicopter_6025-1_inside.jpg|280px|right]]
* Remote: Infrared, 3 channels, integrated charger, 3 band switch
* Remote: Infrared, 3 channels, integrated charger, 3 band switch
** Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
** Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)

Revision as of 23:05, 31 January 2010

Helicopter 6025-1 hand.jpg
Helicopter 6025-1 red.jpg

The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.

Specifications

Helicopter 6025-1 inside.jpg
  • Remote: Infrared, 3 channels, integrated charger, 3 band switch
    • Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
  • Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer
    • Charging connection on left-side
    • Charging: 20 minutes
    • Runtime: approx. 5 minutes
  • Soft cut-off on low battery
  • Weight: 16 grams
  • Dimensions: 100x25x65mm (LxWxH)
  • Main rotor diameter: 110mm

Sanhuan product page:

Tweaks

  • Mount small E-flite battery between the skids
    • Replace battery with higher capacity E-flite battery [1]
  • Removable battery with connector
    • Unsolder from circuit and use small connectors [2] [3] [4]
  • Improve cooling of the motor
    • Metal fins, funnel, thermal grease
  • Remove spring on throttle stick
  • Replace metal screws with nylon
  • Use higher quality LiPo batteries
    • E-flite BMCX/MSR 110mAh 1S 3.7V 3.4 grams [5]
    • OUTRAGE NRG15 3.7V 130mAH 15C [6]
    • ZIPPY 70mAh 20C 1S 1.5 grams [7]
    • ZIPPY 100mAh 20C 1S 3.0 grams [8]
    • ZIPPY Flightmax 138mAh-V2 1S 10C 3.7 grams [9]
  • Balance weight and flight performance
  • Disable LED lights
  • Swap controller trim-pot polarization

Spare parts

These suppliers offer original 6025 spare parts:

Similar mini helicopers

  • Nine Eagles Free Spirit Micro 210A [10]
  • E-flite Blade mSR [11]
  • SanHuan Copter 6023-1 [12] [13]
  • E-flite Blade mCX [14] [15]
  • Nine Eagles Solo [16] - Revell Proto CX (rebranded) [17]

References

Retrieved from "https://beta.ivc.no/wiki/index.php?title=Copter_6025-1&oldid=6516"