Difference between revisions of "Copter 6025-1"
From ivc wiki
Jump to navigationJump to search
(→Tweaks) |
|||
| Line 25: | Line 25: | ||
* Replace metal screws with nylon | * Replace metal screws with nylon | ||
* Use higher quality LiPo batteries | * Use higher quality LiPo batteries | ||
** | ** ZIPPY 70mAh 20C 1S 1.5 grams [http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=7566] | ||
** ZIPPY 100mAh 20C 1S 3.0 grams [http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=7567] | |||
** ZIPPY Flightmax 138mAh-V2 1S 10C 3.7 grams [http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8864] | |||
* Balance weight and flight performance | * Balance weight and flight performance | ||
Revision as of 11:09, 31 January 2010
The is a tiny tiny coaxial aluminium frame helicopter with a gyro and infrared controller. A small vertically mounted tail rotor is used to provide fast forward and backward elevation.
Specifications
- Remote: Infrared, 3 channels, integrated charger, 3 band switch
- Controls: Elevator (for/aft), yaw (rotate), throttle (lift), and elevation speed (hi/low .5CH)
- Battery: 60 mAh 3.7V (1-Cell) Lithium-Polymer
- Chargingcable connected to left-side
- Charging: 20 minutes, approx. 5 minutes runtime
- Soft cut-off on low battery
- Weight: 16 grams
- Dimensions: 100x25x65mm (LxWxH)
- Main rotor diameter: 110mm
Sanhuan product page:
Tweaks
- Mount small E-flite battery between the skids
- Replace battery with higher capacity E-flite battery
- Removable battery with connector
- Unsolder from circuit and use small connectors
- Improve cooling of the motor
- Metal fins, funnel, thermal grease
- Remove spring on throttle stick
- Replace metal screws with nylon
- Use higher quality LiPo batteries
- Balance weight and flight performance
Spare parts
These suppliers offer original 6025 spare parts:
- rc711.com
- rc-fever.com
- okhobbu.hk - soon
