Difference between revisions of "Xbox 360 Downgrader Hardware"
From ivc wiki
Jump to navigationJump to search
| Line 7: | Line 7: | ||
* [http://rapidshare.com/files/61389875/Schematic2.pdf.html Robinsod schematic] - recommended | * [http://rapidshare.com/files/61389875/Schematic2.pdf.html Robinsod schematic] - recommended | ||
* [http://rapidshare.com/files/56483927/xbox360_downgrader.pdf.html Rufusb professional drawed schematic] [http://www.xboxhacker.net/index.php?topic=8555.msg54294#msg54294] | * [http://rapidshare.com/files/56483927/xbox360_downgrader.pdf.html Rufusb professional drawed schematic] [http://www.xboxhacker.net/index.php?topic=8555.msg54294#msg54294] | ||
== Parts == | |||
* 1x 4831384 Prototyping board 100x160 mm | |||
* 1x 7319874 PIC16F876A-I/SP DIL28 | |||
* 2x 7301500 LM339N quad comparator DIL14 | |||
* 1x 7332323 MAX3232CPE RS232 transeiver DIL16 | |||
* 1x 7350317 74HC08N 4x 2-in AND gate DIL14 | |||
* 1x 7470248 20.00MHz resonator 3-pin | |||
* 1x 4408407 D-Sub 9-pin Space-Save | |||
* 2x 4408449 Locknut D-Sub | |||
* 1x 2553071 Extension cable 9-pin D-Sub | |||
* 1x 3565751 Keyboard switch 4.5 mm | |||
* 3x 4813564 IC-socket 14-pin DIL | |||
* 1x 4813580 IC-socket 16-pin DIL | |||
* 1x 4813721 IC-socket 28-pin DIL | |||
* 6x 6565659 Ceramic capacitor 0,1uF/50V | |||
* 21x 6010490 Resistor 1,0k ohm 1/4W | |||
* 1x 6010573 Resistor 4,7k ohm 1/4W | |||
* 1x 6010615 Resistor 10k ohm 1/4W | |||
* 1x 4310827 IDC Connector female plug 16-pin | |||
* 1x 4311627 IDC Connector male socket 16-pin | |||
* 1x 5566054 Ribbon cable grey 16-core 1 meter | |||
* 1x 4205209 DC-plug 1.3 mm | |||
* 1x 4205407 DC-jack 1.3 mm | |||
* 1x 7503857 EL383GD LED 5 mm green | |||
* 1x 7503899 EL383YD LED 5 mm yellow | |||
* 1x 4370334 Pin header 2.54 mm 2x20-pins | |||
* 4x 4371102 Jumper blue open | |||
== Downgrader Hardware == | == Downgrader Hardware == | ||
Revision as of 18:09, 10 October 2007
The downgrader hardware can be built in a day or two from easy-to-find parts. Infectus is rumored to released a daughter board that will interface with the Infectus chip for those not into building the hardware themself.
Schematics
There are two good schematics, one from the creator of the downgrader, robinsod, and one from an enthusiast, rufusb.
Parts
- 1x 4831384 Prototyping board 100x160 mm
- 1x 7319874 PIC16F876A-I/SP DIL28
- 2x 7301500 LM339N quad comparator DIL14
- 1x 7332323 MAX3232CPE RS232 transeiver DIL16
- 1x 7350317 74HC08N 4x 2-in AND gate DIL14
- 1x 7470248 20.00MHz resonator 3-pin
- 1x 4408407 D-Sub 9-pin Space-Save
- 2x 4408449 Locknut D-Sub
- 1x 2553071 Extension cable 9-pin D-Sub
- 1x 3565751 Keyboard switch 4.5 mm
- 3x 4813564 IC-socket 14-pin DIL
- 1x 4813580 IC-socket 16-pin DIL
- 1x 4813721 IC-socket 28-pin DIL
- 6x 6565659 Ceramic capacitor 0,1uF/50V
- 21x 6010490 Resistor 1,0k ohm 1/4W
- 1x 6010573 Resistor 4,7k ohm 1/4W
- 1x 6010615 Resistor 10k ohm 1/4W
- 1x 4310827 IDC Connector female plug 16-pin
- 1x 4311627 IDC Connector male socket 16-pin
- 1x 5566054 Ribbon cable grey 16-core 1 meter
- 1x 4205209 DC-plug 1.3 mm
- 1x 4205407 DC-jack 1.3 mm
- 1x 7503857 EL383GD LED 5 mm green
- 1x 7503899 EL383YD LED 5 mm yellow
- 1x 4370334 Pin header 2.54 mm 2x20-pins
- 4x 4371102 Jumper blue open
Downgrader Hardware
Top side:
Bottom side:
Instructions
Bottom side (click for full resolution):
Top side (click for full resolution):
