Difference between revisions of "Electric Hoverboard Monorover R2 Teardown"
From ivc wiki
Jump to navigationJump to search
| Line 39: | Line 39: | ||
=== Upgrades === | === Upgrades === | ||
* Turnigy nano-tech 3300mah 5S 65C Lipo Pack - | The 18650 pack can be upgraded to another 36V battery packs. The following suggestions can be connected two in parallel and externally charged. | ||
* Turnigy nano-tech 3300mah 5S 65C Lipo Pack - total 6600 mAh capacity | |||
* Turnigy nano-tech 3850mah 5S 65 Lipo Pack - total 7700 mAh capacity | |||
== Control boards == | |||
=== Main board === | |||
=== Sensor boards === | |||
Revision as of 18:27, 25 July 2015
The Monorover R2 is an electric self balancing hoverboard - based on two individual motors joint at a central axis-point. It is an efficient way to get around your neighborhood, park, to the shop, in the mall and other relatively flat surface areas.
Technical specifications
- Released: January 2015
- Product code: DAT-N1
- Manufacturer: Shanghai DAT Electric Vehicle
- Type: self balancing hoverboard
- Main controller: STM32F103 ARM Cortex-M3 core
- Balancing controllers: 2x STM32FEB ARM Cortex-M3 core
- Balancing sensors: 2x InvenSense MPU-605 MEMS 3-axis gyroscope and 3-axis accelerometer
- Motor: 2x direct drive 3-phase brushless DC electric motor, 36V 350W, 700W total
- Tire type: non-pneumatic hollow rubber tire, 170 mm
- Activate: switch pads for both feet
- Lights: 2x blue tinted LED windows
- Work temperature: -10°C to 40°C, peak performance at 10 to 30°C
- Environment protection: IP54 - dust protected, splashing of water
- Battery: Lithium-ion rechargeable 18650-cells, 10S2P 36V 4400mAh 158.4Wh pack with XT60 connector
- Charger: Lithium-ion charger 42V 2A 3-pin connector with built-in fan
- Dimension: 58.5 x 18.5 x 18.0 cm
- Weight: 10kg
- Warranty: 1 year
Usage specifications
- Road surface: relatively flat, no more than +-25mm bumps (asphalt, grass, fine gravel)
- Maximum speed: about 10km/h, begins to beep but keeps going
- Max riding angle: 15°, vary depending on rider's weight, road condition and temperature
- Range per charge: 20km
- Ride height: 110 mm
- Ground clearance: 30 mm
- Turning radius: 0°, on the spot
- Tire-to-chassis clearance: 5 mm
- Max load: 100kg
- Min load: 20kg
- Charge time: 2 to 3 hours
Battery
The battery in the hoverboard is a single 18650-cell based Lithium-ion battery pack with XT60 connectors - no balancing leads.
Upgrades
The 18650 pack can be upgraded to another 36V battery packs. The following suggestions can be connected two in parallel and externally charged.
- Turnigy nano-tech 3300mah 5S 65C Lipo Pack - total 6600 mAh capacity
- Turnigy nano-tech 3850mah 5S 65 Lipo Pack - total 7700 mAh capacity
