Difference between revisions of "Electric Hoverboard Monorover R2 Teardown"
From ivc wiki
Jump to navigationJump to search
| Line 1: | Line 1: | ||
[[Image:hoverboard_content.jpg|400px|right]]The Monorover R2 is an electric self balancing hoverboard - based on two individual motors joint at a central axis-point. It is an efficient way to get around your neighborhood, park, to the shop, in the mall and other relatively flat surface areas. | [[Image:hoverboard_content.jpg|400px|right]]The Monorover R2 is an electric self balancing hoverboard - based on two individual motors joint at a central axis-point. It is an efficient way to get around your neighborhood, park, to the shop, in the mall and other relatively flat surface areas. | ||
== | == Technical specifications == | ||
* Released: January 2015 | * Released: January 2015 | ||
* Product code: DAT-N1 | * Product code: DAT-N1 | ||
* Manufacturer: Shanghai DAT Electric Vehicle | * Manufacturer: Shanghai DAT Electric Vehicle | ||
* Type: self balancing hoverboard | * Type: self balancing hoverboard | ||
* Main controller: STM32F103 ARM Cortex-M3 core | |||
* Balancing controllers: 2x STM32FEB ARM Cortex-M3 core | |||
* Balancing sensors: 2x InvenSense MPU-605 MEMS 3-axis gyroscope and 3-axis accelerometer | |||
* Motor: 2x direct drive 350W brushless DC motor, 700W total | |||
* Tire type: non-pneumatic hollow rubber tire, 170 mm | * Tire type: non-pneumatic hollow rubber tire, 170 mm | ||
* Range per charge: 20km | * Range per charge: 20km | ||
* Activate: switch pads for both feet | * Activate: switch pads for both feet | ||
* Lights: 2x blue tinted LED | * Lights: 2x blue tinted LED windows | ||
* Work temperature: -10°C to 40°C, peak performance at 10 to 30°C | * Work temperature: -10°C to 40°C, peak performance at 10 to 30°C | ||
* Environment protection: IP54 - dust protected, splashing of water | * Environment protection: IP54 - dust protected, splashing of water | ||
* Battery | * Battery: 18650 10S2P 36V 4400mAh / 158.4Wh pack with XT60 connector | ||
* Charger: Lithium-ion charger 42V 2A 3-pin connector and fan | * Charger: Lithium-ion charger 42V 2A 3-pin connector and fan | ||
* Dimension: 58.5 x 18.5 x 18.0 cm | * Dimension: 58.5 x 18.5 x 18.0 cm | ||
* Weight: 10 kg | * Weight: 10 kg | ||
* Warranty: 1 year | * Warranty: 1 year | ||
== Usage specifications == | |||
* Road surface: relatively flat, no more than +-25mm bumps (asphalt, grass, fine gravel) | |||
* Maximum speed: about 10km/h, begins to beep but keeps going | |||
* Max riding angle: 15° - vary depending on rider's weight, road condition and temperature | |||
* Ride height: 110 mm | |||
* Ground clearance: 30 mm | |||
* Turning radius: 0°, on the spot | |||
* Tire-to-chassis clearance: 5 mm | |||
* Max load: 100 kg | |||
* Min load: 20 kg | |||
* Charge time: 2 to 3 hours | |||
== Battery == | |||
[[Image:hoverboard_battery_pack.jpg|400px|right]]The battery in the hoverboard is a single 18650-cell based Lithium-ion battery pack with XT60 connectors - no balancing leads. | |||
Revision as of 14:45, 25 July 2015
The Monorover R2 is an electric self balancing hoverboard - based on two individual motors joint at a central axis-point. It is an efficient way to get around your neighborhood, park, to the shop, in the mall and other relatively flat surface areas.
Technical specifications
- Released: January 2015
- Product code: DAT-N1
- Manufacturer: Shanghai DAT Electric Vehicle
- Type: self balancing hoverboard
- Main controller: STM32F103 ARM Cortex-M3 core
- Balancing controllers: 2x STM32FEB ARM Cortex-M3 core
- Balancing sensors: 2x InvenSense MPU-605 MEMS 3-axis gyroscope and 3-axis accelerometer
- Motor: 2x direct drive 350W brushless DC motor, 700W total
- Tire type: non-pneumatic hollow rubber tire, 170 mm
- Range per charge: 20km
- Activate: switch pads for both feet
- Lights: 2x blue tinted LED windows
- Work temperature: -10°C to 40°C, peak performance at 10 to 30°C
- Environment protection: IP54 - dust protected, splashing of water
- Battery: 18650 10S2P 36V 4400mAh / 158.4Wh pack with XT60 connector
- Charger: Lithium-ion charger 42V 2A 3-pin connector and fan
- Dimension: 58.5 x 18.5 x 18.0 cm
- Weight: 10 kg
- Warranty: 1 year
Usage specifications
- Road surface: relatively flat, no more than +-25mm bumps (asphalt, grass, fine gravel)
- Maximum speed: about 10km/h, begins to beep but keeps going
- Max riding angle: 15° - vary depending on rider's weight, road condition and temperature
- Ride height: 110 mm
- Ground clearance: 30 mm
- Turning radius: 0°, on the spot
- Tire-to-chassis clearance: 5 mm
- Max load: 100 kg
- Min load: 20 kg
- Charge time: 2 to 3 hours
Battery
The battery in the hoverboard is a single 18650-cell based Lithium-ion battery pack with XT60 connectors - no balancing leads.
