Difference between revisions of "Skittles M&M's Sorting Machine"
From ivc wiki
Jump to navigationJump to search
Line 24: | Line 24: | ||
| 5 || S125-1T || GWS Sail Winch 360-degree Rotation Servo || 1 || 19.95USD | | 5 || S125-1T || GWS Sail Winch 360-degree Rotation Servo || 1 || 19.95USD | ||
|- | |- | ||
| 6 || | | 6 || FEEDER || 3D Printed Hopper/feed wheel || 1 || 5USD | ||
|- | |- | ||
| 6 || | | 6 || SEEDER|| 3D Printed Carousel/item seeder || 1 || 5USD | ||
|- | |- | ||
| 4 || PRT-10373 || Jumper Wire 3-pin 12-inch || 1 || 1.95USD | | 4 || PRT-10373 || Jumper Wire 3-pin 12-inch || 1 || 1.95USD |
Revision as of 16:17, 18 November 2013
This is a Sorting Machine for separating the colors of Skittles and M&Ms into 5-6 cups.
Features
Parts and cost
Below is the BOM for the project. Useful if you want to replicate or make something similar to this.
No. | Part number | Description | Quantity | Cost |
---|---|---|---|---|
1 | ARD-UNO | Arduino Uno | 1 | 29.95USD |
2 | ROB-09453 | Analog Line Sensor (QRE1113) Breakout Board | 1 | 2.95USD |
3 | SEN-10701 | Color Light Sensor (ADJD-S311-CR999) Evaluation Board | 1 | 14.95USD |
4 | S35 STD | GWS Robotic Continuous Rotation Servo | 1 | 13.49 USD |
5 | S125-1T | GWS Sail Winch 360-degree Rotation Servo | 1 | 19.95USD |
6 | FEEDER | 3D Printed Hopper/feed wheel | 1 | 5USD |
6 | SEEDER | 3D Printed Carousel/item seeder | 1 | 5USD |
4 | PRT-10373 | Jumper Wire 3-pin 12-inch | 1 | 1.95USD |
5 | PRT-10375 | Jumper Wire 5-pin 12-inch | 1 | 1.95USD |
6 | IC-TUBE | IC/compoment plastic tube 23x20x500mm | 10 | free/0.50USD |
Total | 99USD |
Download
Code
The C code for the project is available below. It is Arduino IDE compatible and opens all the required libraries.
- Download
Models
Download the package below to 3D print your own parts. The files are STL and ready to be imported into most 3D printing software.
- Download