Difference between revisions of "Skittles M&M's Sorting Machine"
From ivc wiki
Jump to navigationJump to search
| Line 11: | Line 11: | ||
! scope="col" width="100pt" | Part number | ! scope="col" width="100pt" | Part number | ||
! scope="col" width="350pt" | Description | ! scope="col" width="350pt" | Description | ||
! scope="col" width="50pt" | Quantity | |||
! scope="col" width="75pt" | Cost | ! scope="col" width="75pt" | Cost | ||
|- | |- | ||
| 1 || ARD-UNO || Arduino Uno || 29.95USD | | 1 || ARD-UNO || Arduino Uno || 1 || 29.95USD | ||
|- | |- | ||
| 2 || ROB-09453 || Analog Line Sensor (QRE1113) Breakout || 2.95USD | | 2 || ROB-09453 || Analog Line Sensor (QRE1113) Breakout || 1 || 2.95USD | ||
|- | |- | ||
| 3 || SEN-10701 || Color Light Sensor (ADJD-S311-CR999) Evaluation Board || 14.95USD | | 3 || SEN-10701 || Color Light Sensor (ADJD-S311-CR999) Evaluation Board || 1 || 14.95USD | ||
|- | |- | ||
| 4 || X || Servo Continuous Rotation || XUSD | | 4 || X || Servo Continuous Rotation || 1 || XUSD | ||
|- | |- | ||
| 5 || X || Servo 360-degree Rotation || XUSD | | 5 || X || Servo 360-degree Rotation || 1 || XUSD | ||
|- | |- | ||
| 4 || PRT-10373 || Jumper Wire 3-pin 12-inch || 1.95USD | | 4 || PRT-10373 || Jumper Wire 3-pin 12-inch || 1 || 1.95USD | ||
|- | |- | ||
| 5 || PRT-10375 || Jumper Wire 5-pin 12-inch || 1.95USD | | 5 || PRT-10375 || Jumper Wire 5-pin 12-inch || 1 || 1.95USD | ||
|- | |- | ||
| 6 || IC-TUBE || IC/compoment plastic tube 23x20x500mm || free/0.50USD | | 6 || IC-TUBE || IC/compoment plastic tube 23x20x500mm || 10 || free/0.50USD | ||
|- | |- | ||
| || | | || || || '''Total''' || 99USD | ||
|- | |- | ||
|} | |} | ||
Revision as of 22:09, 17 November 2013
This is a Sorting Machine for separating the colors of Skittles and M&Ms into 5-6 cups.
Features
Parts and cost
Below is the BOM for the project. Useful if you want to replicate or make something similar to this.
| No. | Part number | Description | Quantity | Cost |
|---|---|---|---|---|
| 1 | ARD-UNO | Arduino Uno | 1 | 29.95USD |
| 2 | ROB-09453 | Analog Line Sensor (QRE1113) Breakout | 1 | 2.95USD |
| 3 | SEN-10701 | Color Light Sensor (ADJD-S311-CR999) Evaluation Board | 1 | 14.95USD |
| 4 | X | Servo Continuous Rotation | 1 | XUSD |
| 5 | X | Servo 360-degree Rotation | 1 | XUSD |
| 4 | PRT-10373 | Jumper Wire 3-pin 12-inch | 1 | 1.95USD |
| 5 | PRT-10375 | Jumper Wire 5-pin 12-inch | 1 | 1.95USD |
| 6 | IC-TUBE | IC/compoment plastic tube 23x20x500mm | 10 | free/0.50USD |
| Total | 99USD |
Download
Code
The C code for the project is available below. It is Arduino IDE compatible and opens all the required libraries.
- Download
Models
Download the package below to 3D print your own parts. The files are STL and ready to be imported into most 3D printing software.
- Download
