Difference between revisions of "Skittles M&M's Sorting Machine"
From ivc wiki
Jump to navigationJump to search
| Line 9: | Line 9: | ||
|- | |- | ||
! scope="col" width="50pt" | No. | ! scope="col" width="50pt" | No. | ||
! scope="col" width=" | ! scope="col" width="100pt" | Part number | ||
! scope="col" width="350pt" | Description | ! scope="col" width="350pt" | Description | ||
! scope="col" width="75pt" | Cost | ! scope="col" width="75pt" | Cost | ||
Revision as of 22:08, 17 November 2013
This is a Sorting Machine for separating the colors of Skittles and M&Ms into 5-6 cups.
Features
Parts and cost
Below is the BOM for the project. Useful if you want to replicate or make something similar to this.
| No. | Part number | Description | Cost |
|---|---|---|---|
| 1 | ARD-UNO | Arduino Uno | 29.95USD |
| 2 | ROB-09453 | Analog Line Sensor (QRE1113) Breakout | 2.95USD |
| 3 | SEN-10701 | Color Light Sensor (ADJD-S311-CR999) Evaluation Board | 14.95USD |
| 4 | X | Servo Continuous Rotation | XUSD |
| 5 | X | Servo 360-degree Rotation | XUSD |
| 4 | PRT-10373 | Jumper Wire 3-pin 12-inch | 1.95USD |
| 5 | PRT-10375 | Jumper Wire 5-pin 12-inch | 1.95USD |
| 6 | IC-TUBE | IC/compoment plastic tube 23x20x500mm | free/0.50USD |
| Total | 99USD |
Download
Code
The C code for the project is available below. It is Arduino IDE compatible and opens all the required libraries.
- Download
Models
Download the package below to 3D print your own parts. The files are STL and ready to be imported into most 3D printing software.
- Download
