Difference between revisions of "Skittles M&M's Sorting Machine"
From ivc wiki
Jump to navigationJump to search
(Created page with "This is a Sorting Machine for separating the colors of Skittles and M&Ms into 5-6 cups. == Features == == Parts == == Code == == Video == == References ==") |
|||
| Line 3: | Line 3: | ||
== Features == | == Features == | ||
== Parts == | == Parts and cost == | ||
Below is the BOM for the project. Useful if you want to replicate or make something similar to this. | |||
== Code == | {| class="wikitable" style="margin-left: 30px" | ||
|- | |||
! scope="col" width="50pt" | No. | |||
! scope="col" width="300pt" | Description | |||
! scope="col" width="200pt" | Part number | |||
! scope="col" width="75pt" | Cost | |||
|- | |||
| 1 || ARD-UNO || Arduino Uno || 29.95USD | |||
|- | |||
| 2 || ROB-09453 || Analog Line Sensor (QRE1113) Breakout || 2.95USD | |||
|- | |||
| 3 || SEN-10701 || Color Light Sensor (ADJD-S311-CR999) Evaluation Board || 14.95USD | |||
|- | |||
| 4 || X || Servo Continuous Rotation || XUSD | |||
|- | |||
| 5 || X || Servo 360-degree Rotation || XUSD | |||
|- | |||
| 4 || PRT-10373 || Jumper Wire 3-pin 12-inch || 1.95USD | |||
|- | |||
| 5 || PRT-10375 || Jumper Wire 5-pin 12-inch || 1.95USD | |||
|- | |||
| 6 || IC-TUBE || IC/compoment plastic tube 23x20x500mm || free/0.50USD | |||
|- | |||
| || || '''Total''' || 99USD | |||
|- | |||
|} | |||
== Download == | |||
=== Code === | |||
The C code for the project is available below. It is Arduino IDE compatible and opens all the required libraries. | |||
* Download | |||
=== Models === | |||
Download the package below to 3D print your own parts. The files are STL and ready to be imported into most 3D printing software. | |||
* Download | |||
== Video == | == Video == | ||
== References == | == References == | ||
Revision as of 22:08, 17 November 2013
This is a Sorting Machine for separating the colors of Skittles and M&Ms into 5-6 cups.
Features
Parts and cost
Below is the BOM for the project. Useful if you want to replicate or make something similar to this.
| No. | Description | Part number | Cost |
|---|---|---|---|
| 1 | ARD-UNO | Arduino Uno | 29.95USD |
| 2 | ROB-09453 | Analog Line Sensor (QRE1113) Breakout | 2.95USD |
| 3 | SEN-10701 | Color Light Sensor (ADJD-S311-CR999) Evaluation Board | 14.95USD |
| 4 | X | Servo Continuous Rotation | XUSD |
| 5 | X | Servo 360-degree Rotation | XUSD |
| 4 | PRT-10373 | Jumper Wire 3-pin 12-inch | 1.95USD |
| 5 | PRT-10375 | Jumper Wire 5-pin 12-inch | 1.95USD |
| 6 | IC-TUBE | IC/compoment plastic tube 23x20x500mm | free/0.50USD |
| Total | 99USD |
Download
Code
The C code for the project is available below. It is Arduino IDE compatible and opens all the required libraries.
- Download
Models
Download the package below to 3D print your own parts. The files are STL and ready to be imported into most 3D printing software.
- Download
