Xbox 360 Lite-On DG16D2S Extract Key - Revision history

Ivc: /* Connect */

2008-12-30T16:30:46Z

Connect

← Older revision		Revision as of 16:30, 30 December 2008
Line 57:		Line 57:

	If you buy or use a pre-built adapter, remember tht '''V+''' or '''Vcc''' is the same as '''3.3v''', '''V-''' or '''Vss''' is the same as '''Ground''', '''Tx''' or '''T1 In''' is the same as '''TxD''', and '''Rx''' or '''R1 Out''' is the same as '''RxD'''. The MAX3232 level shifter can operate on voltages ranging from 3.0v to 6.0v.		If you buy or use a pre-built adapter, remember tht '''V+''' or '''Vcc''' is the same as '''3.3v''', '''V-''' or '''Vss''' is the same as '''Ground''', '''Tx''' or '''T1 In''' is the same as '''TxD''', and '''Rx''' or '''R1 Out''' is the same as '''RxD'''. The MAX3232 level shifter can operate on voltages ranging from 3.0v to 6.0v.

			* R707 going to TxD on the MAX3232
			* R708 going to RxD on the MAX3232

	The adapter installed:		The adapter installed:

Ivc at 16:29, 30 December 2008

2008-12-30T16:29:22Z

← Older revision		Revision as of 16:29, 30 December 2008
Line 43:		Line 43:
	* [http://www.xboxhacker.net/index.php?topic=10204.msg66359#msg66359 Xbox-hacker suggestion]		* [http://www.xboxhacker.net/index.php?topic=10204.msg66359#msg66359 Xbox-hacker suggestion]
	* [http://picprojects.org.uk/projects/simpleSIO/ssio.htm Simple RS232 to logic level converter]		* [http://picprojects.org.uk/projects/simpleSIO/ssio.htm Simple RS232 to logic level converter]

			Alternative:

	[[Image:Xbox 360 lite-on rs232 simple.jpg\|400px]]		[[Image:Xbox 360 lite-on rs232 simple.jpg\|400px]]

Ivc at 23:36, 27 December 2008

2008-12-27T23:36:32Z

← Older revision		Revision as of 23:36, 27 December 2008
Line 4:		Line 4:

	'''Replacing drive note:''' When replacing the DVD Drive: It's only recommended to use the BenQ drive at this stage, using other drives gives a very high possibility of getting banned if you go on Xbox Live, obviously any drive can get you banned but the Toshiba-Samsung and Hitachi-LG drives will have a far higher possibility to be banned. A special firmware for TS and HL has to be released to deal with some security sector (SS) issue when spoofing.		'''Replacing drive note:''' When replacing the DVD Drive: It's only recommended to use the BenQ drive at this stage, using other drives gives a very high possibility of getting banned if you go on Xbox Live, obviously any drive can get you banned but the Toshiba-Samsung and Hitachi-LG drives will have a far higher possibility to be banned. A special firmware for TS and HL has to be released to deal with some security sector (SS) issue when spoofing.

			'''Update 27th December 2008:''' The release of iXtreme v1.5 now enables flashing of the Lite-On drive. It still requires extracting of the key.

	== Lite-On DG-16D2S ==		== Lite-On DG-16D2S ==

Ivc: /* Build */

2008-10-06T17:50:19Z

Build

← Older revision		Revision as of 17:50, 6 October 2008
Line 25:		Line 25:
	* ST3232		* ST3232

	Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything. [http://beta.ivancover.com/xbox360/lite-on/MAX3222-MAX3241.pdf Download datasheet]		Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything.

			* [http://beta.ivancover.com/xbox360/lite-on/MAX3222-MAX3241.pdf Download MAX3232 datasheet]

	[[Image:Xbox 360 lite-on rs232 build.png\|400px]]		[[Image:Xbox 360 lite-on rs232 build.png\|400px]]

Ivc: /* Build */

2008-10-06T17:49:55Z

Build

← Older revision		Revision as of 17:49, 6 October 2008
Line 25:		Line 25:
	* ST3232		* ST3232

	Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything.		Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything. [http://beta.ivancover.com/xbox360/lite-on/MAX3222-MAX3241.pdf Download datasheet]

	[[Image:Xbox 360 lite-on rs232 build.png\|400px]]		[[Image:Xbox 360 lite-on rs232 build.png\|400px]]

Ivc: /* Build */

2008-10-06T17:46:18Z

Build

← Older revision		Revision as of 17:46, 6 October 2008
Line 19:		Line 19:
	Either buy a pre-built RS-232 level shifter adapter or build one yourself. The parts are cheap and it isn't hard to build.		Either buy a pre-built RS-232 level shifter adapter or build one yourself. The parts are cheap and it isn't hard to build.

	Any USB-based RS-232 adapters (like [~~to build an adapter~~ this]) will work fine with DVDKey32 (Windows application). The regular 16-bit DVDKey application for DOS will not work with USB-adapters, only COM-port based adapters.		Any USB-based RS-232 adapters (like [http://www.pololu.com/catalog/product/391 this]) will work fine with DVDKey32 (Windows application). The regular 16-bit DVDKey application for DOS will not work with USB-adapters, only COM-port based adapters.

	To build an adapter, these two RS-232 transceivers will work fine:		To build an adapter, these two RS-232 transceivers will work fine:

Ivc at 17:41, 6 October 2008

2008-10-06T17:41:53Z

← Older revision		Revision as of 17:41, 6 October 2008
Line 3:		Line 3:
	Thanks goes to Geremia, C4eva, Tiros, Schtrom, TMF, Redline99, and the Xbox-hacker community.		Thanks goes to Geremia, C4eva, Tiros, Schtrom, TMF, Redline99, and the Xbox-hacker community.

	'''When replacing the DVD Drive: It's only recommended to use the BenQ drive at this stage, using other drives gives a very high possibility of getting banned if you go on Xbox Live, obviously any drive can get you banned but the Toshiba-Samsung and Hitachi-LG drives will have a far higher possibility to be banned. A special firmware for TS and HL has to be released to deal with some security sector (SS) issue when spoofing.~~'''~~		'''Replacing drive note:''' When replacing the DVD Drive: It's only recommended to use the BenQ drive at this stage, using other drives gives a very high possibility of getting banned if you go on Xbox Live, obviously any drive can get you banned but the Toshiba-Samsung and Hitachi-LG drives will have a far higher possibility to be banned. A special firmware for TS and HL has to be released to deal with some security sector (SS) issue when spoofing.

	== Lite-On DG-16D2S ==		== Lite-On DG-16D2S ==
Line 13:		Line 13:
	== Serial Adapter ==		== Serial Adapter ==

	The serial adapter will be connected to the Lite-On drive board and used to interface with the MT1319L controller using the DVDKey utility (more below).		The serial adapter will be connected to the Lite-On drive board and used to interface with the MT1319L controller using the special DVDKey utility (more below).

	=== Build ===		=== Build ===
Line 19:		Line 19:
	Either buy a pre-built RS-232 level shifter adapter or build one yourself. The parts are cheap and it isn't hard to build.		Either buy a pre-built RS-232 level shifter adapter or build one yourself. The parts are cheap and it isn't hard to build.

	~~Two~~ RS-232 ~~transecivers that~~ will work fine:		Any USB-based RS-232 adapters (like [to build an adapter this]) will work fine with DVDKey32 (Windows application). The regular 16-bit DVDKey application for DOS will not work with USB-adapters, only COM-port based adapters.

			To build an adapter, these two RS-232 transceivers will work fine:
	* MAX3232		* MAX3232
	* ST3232		* ST3232

	~~The other~~ required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard.		Other required parts are 5x 0.1 uF (1000nF) ceramic or electrolytic capacitors, 1x D-Sub 9-pin female connector, and maybe a 2.54 mm spaced breadboard to mount everything.

	[[Image:Xbox 360 lite-on rs232 build.png\|400px]]		[[Image:Xbox 360 lite-on rs232 build.png\|400px]]

Ivc: /* Dumping Procedure */

2008-09-20T18:48:56Z

Dumping Procedure

← Older revision		Revision as of 18:48, 20 September 2008
Line 217:		Line 217:

	c:\DVDKEY>		c:\DVDKEY>

			* ''key.bin'' is dumped through the COM-port
			* ''inquiry.bin'' and ''identify.bin'' is dumped through the SATA-port

	As a side note, all this also work exactly the same on a BenQ drive. Leave the tray half-open and cylce the drive power between each try.		As a side note, all this also work exactly the same on a BenQ drive. Leave the tray half-open and cylce the drive power between each try.

Ivc: /* Summary */

2008-09-20T18:42:38Z

Summary

← Older revision		Revision as of 18:42, 20 September 2008
Line 508:		Line 508:
	== Summary ==		== Summary ==

	To summarize the entire process to a simple step-by-step guide:		To summarize the entire process to a simple step-by-step guide[http://www.xboxhacker.net/index.php?topic=10204.msg67165#msg67165]:

	# Open up Lite-On		# Open up Lite-On

Ivc at 18:42, 20 September 2008

2008-09-20T18:42:18Z

← Older revision		Revision as of 18:42, 20 September 2008
Line 505:		Line 505:

	There are many good tutorials available that shows how to flash the different drives.		There are many good tutorials available that shows how to flash the different drives.

			== Summary ==

			To summarize the entire process to a simple step-by-step guide:

			# Open up Lite-On
			# Bridge resistor points
			# Solder on Tx, Rx, Gnd, and 3.3v
			# Boot up DOS
			# Connect power to 360 and DVD drive
			# Eject drive
			# Pull power plug of 360 and DVD drive
			# Close DVD drive with your hand half way
			# Plug in 360 and power it on
			# Plug in DVD power, and SATA cable from your computer
			# Connect adapter to COM1-port
			# Run dvdkey xxxx (xxxx = your sata port)
			# Dump key and identity
			# Spoof new Hitachi-LG/Toshiba-Samsung/BenQ DVD drive

	== References ==		== References ==