Tasmota Flash Oukitel P2 Plug - Revision history

Ivc at 17:32, 6 December 2019

2019-12-06T17:32:51Z

← Older revision		Revision as of 17:32, 6 December 2019
Line 2:		Line 2:

	Oukitel P2, also know as Merisny P2, is a 16A rated WiFi controllable plug. It can be purchased for 12USD on Banggood. It is based on the ESP8266 MCU. Works flawlessly with the [https://github.com/arendst/Tasmota Tasmota firmware].		Oukitel P2, also know as Merisny P2, is a 16A rated WiFi controllable plug. It can be purchased for 12USD on Banggood. It is based on the ESP8266 MCU. Works flawlessly with the [https://github.com/arendst/Tasmota Tasmota firmware].

			I recommend doing an inspection and applying solder where there are weak spots or blank tinned copper pads, e.g. on the left edge of the board the relay output can be a bit sparsely tinned.

	== Wiring ==		== Wiring ==

Ivc at 17:12, 6 December 2019

2019-12-06T17:12:04Z

← Older revision		Revision as of 17:12, 6 December 2019
Line 64:		Line 64:
	{"NAME":"Oukitel P2","GPIO":[0,0,52,0,0,0,0,0,0,17,0,21,0],"FLAG":1,"BASE":18}		{"NAME":"Oukitel P2","GPIO":[0,0,52,0,0,0,0,0,0,17,0,21,0],"FLAG":1,"BASE":18}

	It provides one ADC0 ~~output~~, usage undefined at the moment.		It provides one ADC0 input, usage undefined at the moment.

Ivc at 17:11, 6 December 2019

2019-12-06T17:11:49Z

← Older revision		Revision as of 17:11, 6 December 2019
Line 63:		Line 63:

	{"NAME":"Oukitel P2","GPIO":[0,0,52,0,0,0,0,0,0,17,0,21,0],"FLAG":1,"BASE":18}		{"NAME":"Oukitel P2","GPIO":[0,0,52,0,0,0,0,0,0,17,0,21,0],"FLAG":1,"BASE":18}

			It provides one ADC0 output, usage undefined at the moment.

Ivc at 17:11, 6 December 2019

2019-12-06T17:11:07Z

← Older revision		Revision as of 17:11, 6 December 2019
Line 1:		Line 1:
	[[Image:tasmota_oukitel_p2_plug.jpg\|400px\|right]]		[[Image:tasmota_oukitel_p2_plug.jpg\|400px\|right]]

	Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU. Works flawlessly with the [https://github.com/arendst/Tasmota Tasmota firmware].		Oukitel P2, also know as Merisny P2, is a 16A rated WiFi controllable plug. It can be purchased for 12USD on Banggood. It is based on the ESP8266 MCU. Works flawlessly with the [https://github.com/arendst/Tasmota Tasmota firmware].

	== Wiring ==		== Wiring ==
Line 57:		Line 57:
	Hard resetting via RTS pin...		Hard resetting via RTS pin...
	user$		user$

			== Setup ==

			Connect to the device over Wifi as any regular Tasmota device and configure the template to the following:

			{"NAME":"Oukitel P2","GPIO":[0,0,52,0,0,0,0,0,0,17,0,21,0],"FLAG":1,"BASE":18}

Ivc at 17:08, 6 December 2019

2019-12-06T17:08:45Z

← Older revision		Revision as of 17:08, 6 December 2019
Line 1:		Line 1:
	[[Image:tasmota_oukitel_p2_plug.jpg\|400px\|right]]		[[Image:tasmota_oukitel_p2_plug.jpg\|400px\|right]]

	Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU.		Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU. Works flawlessly with the [https://github.com/arendst/Tasmota Tasmota firmware].

	== Wiring ==		== Wiring ==

Ivc at 17:08, 6 December 2019

2019-12-06T17:08:11Z

← Older revision		Revision as of 17:08, 6 December 2019
Line 31:		Line 31:
	Hard resetting via RTS pin...		Hard resetting via RTS pin...
	user$		user$

			Now, unplug and plug-in the ground pin from the serial-adapter to reset the ESP MCU. If the following step does not work, try disabling the 3V3 pin instead - as the sudden external power up might not put the MCU in the upload right state.

	=== Upload firmware ===		=== Upload firmware ===

Ivc at 16:59, 6 December 2019

2019-12-06T16:59:50Z

← Older revision		Revision as of 16:59, 6 December 2019
Line 1:		Line 1:
	[[Image:tasmota_oukitel_p2_plug.jpg\|~~600px~~\|right]]		[[Image:tasmota_oukitel_p2_plug.jpg\|400px\|right]]

	Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU.		Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU.
Line 5:		Line 5:
	== Wiring ==		== Wiring ==

	[[Image:tasmota_oukitel_p2_plug_wiring_top.jpg\|~~500px~~]]		[[Image:tasmota_oukitel_p2_plug_wiring_top.jpg\|300px]]
	[[Image:~~tasmota_oukitel_p2_plug_wiring_bottom~~.jpg\|~~500px~~]]		[[Image:tasmota_oukitel_p2_plug_wiring_overview.jpg\|300px]]

	== Esptool ==		== Esptool ==

Ivc at 16:56, 6 December 2019

2019-12-06T16:56:11Z

← Older revision		Revision as of 16:56, 6 December 2019
Line 1:		Line 1:
	[[Image:tasmota_oukitel_p2_plug.jpg\|600px\|right]]		[[Image:tasmota_oukitel_p2_plug.jpg\|600px\|right]]

			Oukitel P2, also know as Merisny P2, is a WiFi controllable plug. It is based on the ESP8266 MCU.

			== Wiring ==

			[[Image:tasmota_oukitel_p2_plug_wiring_top.jpg\|500px]]
			[[Image:tasmota_oukitel_p2_plug_wiring_bottom.jpg\|500px]]

			== Esptool ==

			Download the [https://github.com/espressif/esptool Esptool] to erase and flash the Tasmota firmware.

			=== Erase flash ===

			Change the right serial-port, e.g. /dev/tty.usbserial-A98AVCSI

			user$ ./esptool.py --port /dev/tty.usbserial-A98AVCSI erase_flash
			esptool.py v2.5.1
			Serial port /dev/tty.usbserial-A98AVCSI
			Connecting....
			Detecting chip type... ESP8266
			Chip is ESP8285
			Features: WiFi, Embedded Flash
			MAC: 2c:f4:32:c9:d1:91
			Uploading stub...
			Running stub...
			Stub running...
			Erasing flash (this may take a while)...
			Chip erase completed successfully in 3.7s
			Hard resetting via RTS pin...
			user$

			=== Upload firmware ===

			Download the latest [https://github.com/arendst/Tasmota/releases Tasmota firmware] (tasmota.bin)

			user$ ./esptool.py --port /dev/tty.usbserial-A98AVCSI write_flash -fs 1MB -fm dout 0x0 tasmota.bin
			esptool.py v2.5.1
			Serial port /dev/tty.usbserial-A98AVCSI
			Connecting........_____....._____....._____....._
			Detecting chip type... ESP8266
			Chip is ESP8285
			Features: WiFi, Embedded Flash
			MAC: 2c:f4:32:c9:d1:91
			Uploading stub...
			Running stub...
			Stub running...
			Configuring flash size...
			Compressed 575616 bytes to 396460...
			Wrote 575616 bytes (396460 compressed) at 0x00000000 in 35.4 seconds (effective 130.1 kbit/s)...
			Hash of data verified.

			Leaving...
			Hard resetting via RTS pin...
			user$

Ivc: Created page with "right"

2019-12-06T16:48:19Z

Created page with "600px|right"

New page

[[Image:tasmota_oukitel_p2_plug.jpg|600px|right]]