Domekt Komfovent C4 Plus Modbus Registers - Revision history

Ivc: /* Ventilation */

2024-04-18T14:40:47Z

Ventilation

← Older revision		Revision as of 14:40, 18 April 2024
Line 356:		Line 356:
	\| Integer		\| Integer
	\| 0..1		\| 0..1
	\| Override/OVR-mode, enables fan intensity level ~~4 (maximum)~~ for a set time period		\| Override/OVR-mode, enables fan override intensity level for a set time period
	\| 0-Disable, 1-Enable - DIP switch 4 set to ON will disable the exhaust fan, or OFF to leave both fans running		\| 0-Disable, 1-Enable - DIP switch 4 set to ON will disable the exhaust fan, or OFF to leave both fans running
	\| 0		\| 0

Ivc: /* Ventilation */

2024-04-18T14:36:57Z

Ventilation

← Older revision		Revision as of 14:36, 18 April 2024
Line 302:		Line 302:
	\| Supply ventilation intensity level 2 (EC-type fan / AC-type fan)		\| Supply ventilation intensity level 2 (EC-type fan / AC-type fan)
	\| 20 to 100% (EC-fan), 0 to 2 (AC-fan)		\| 20 to 100% (EC-fan), 0 to 2 (AC-fan)
	\| 60		\| 2
	\|-		\|-
	\| 10104		\| 10104
Line 334:		Line 334:
	\| Exhaust ventilation intensity level 2 (EC-type fan / AC-type fan)		\| Exhaust ventilation intensity level 2 (EC-type fan / AC-type fan)
	\| 20 to 100% (EC-fan), 0 to 2 (AC-fan)		\| 20 to 100% (EC-fan), 0 to 2 (AC-fan)
	\| 60		\| 2
	\|-		\|-
	\| 10108		\| 10108

Ivc: /* General */

2024-04-18T14:36:22Z

General

← Older revision		Revision as of 14:36, 18 April 2024
Line 158:		Line 158:
	\| Season (heating permitted or prohibited)		\| Season (heating permitted or prohibited)
	\| 1-Winter, 0-Summer (heater off)		\| 1-Winter, 0-Summer (heater off)
	\| -		\| 1
	\|-		\|-
	\| 10001		\| 10001

Ivc: /* Operation control panel (not in tech doc) */

2024-04-18T14:35:42Z

Operation control panel (not in tech doc)

← Older revision		Revision as of 14:35, 18 April 2024
Line 1,047:		Line 1,047:
	\| Exhaust fan level 0 set point		\| Exhaust fan level 0 set point
	\| 0 to 100%		\| 0 to 100%
	\| -		\| 0
	\|-		\|-
	\| 10408		\| 10408

Ivc: /* Operation control panel (not in tech doc) */

2024-04-18T14:35:18Z

Operation control panel (not in tech doc)

← Older revision		Revision as of 14:35, 18 April 2024
Line 1,023:		Line 1,023:
	\| Supply fan level 0 set point		\| Supply fan level 0 set point
	\| 0 to 100%		\| 0 to 100%
	\| -		\| 0
	\|-		\|-
	\| 10405		\| 10405
Line 1,031:		Line 1,031:
	\| Supply fan level 1 set point		\| Supply fan level 1 set point
	\| 0 to 100%		\| 0 to 100%
	\| -		\| 20
	\|-		\|-
	\| 10406		\| 10406
Line 1,055:		Line 1,055:
	\| Exhaust fan level 1 set point		\| Exhaust fan level 1 set point
	\| 0 to 100%		\| 0 to 100%
	\| -		\| 20
	\|-		\|-
	\| 10409		\| 10409

Ivc: /* Operation control panel (not in tech doc) */

2024-04-18T14:32:26Z

Operation control panel (not in tech doc)

← Older revision		Revision as of 14:32, 18 April 2024
Line 1,005:		Line 1,005:
	\| Integer		\| Integer
	\| 1..3		\| 1..3
	\| Ventilation intensity level (manual mode)		\| Ventilation intensity level (in manual mode)
	\| 1-Low fan speed (60VAC), <br>2-Normal fan speed (recommended) (150VAC), <br>3-High fan speed (230VAC)		\| 1-Low fan speed (60VAC), <br>2-Normal fan speed (recommended) (150VAC), <br>3-High fan speed (230VAC)
	\| 2		\| 2

Ivc: /* Register list */

2024-04-18T14:31:51Z

Show changes

Ivc: /* Register list */

2024-04-18T14:26:32Z

Show changes

Ivc: /* General */

2024-04-18T14:22:13Z

General

← Older revision		Revision as of 14:22, 18 April 2024
Line 158:		Line 158:
	\| Season (heating permitted or prohibited)		\| Season (heating permitted or prohibited)
	\| 1-Winter, 0-Summer (heater off)		\| 1-Winter, 0-Summer (heater off)
			\| -
	\|-		\|-
	\| 10001		\| 10001
Line 165:		Line 166:
	\| Alarm status (warnings)		\| Alarm status (warnings)
	\| 14-Service, 13-Heater off, 11-Rotor stop		\| 14-Service, 13-Heater off, 11-Rotor stop
			\| -
	\|-		\|-
	\| 10002		\| 10002
Line 172:		Line 174:
	\| System configuration/DIP switch status		\| System configuration/DIP switch status
	\| b0-Heat exchange type (0-RECU/1-REGO), <br>b1-Heater type (0-Electric/1-Water), <br>b2-Fan type (0-AC/1-EC), <br>b3-OVR-mode (0-All fans/1-Exhaust fan stop)<br>(1-On, 0-Off)		\| b0-Heat exchange type (0-RECU/1-REGO), <br>b1-Heater type (0-Electric/1-Water), <br>b2-Fan type (0-AC/1-EC), <br>b3-OVR-mode (0-All fans/1-Exhaust fan stop)<br>(1-On, 0-Off)
			\| -
	\|-		\|-
	\| 10003		\| 10003
Line 179:		Line 182:
	\| Time, hhmm		\| Time, hhmm
	\| Ex. 8:05 => 0x0805, 18:30 => 0x121E (18=0x12, 30=0x1E)		\| Ex. 8:05 => 0x0805, 18:30 => 0x121E (18=0x12, 30=0x1E)
			\| -
	\|-		\|-
	\| 10004		\| 10004
Line 186:		Line 190:
	\| Day of the week		\| Day of the week
	\| 1-Mon, 2-Tue, 3-Wed, 4-Thu, 5-Fri, 6-Sat, 7-Sun		\| 1-Mon, 2-Tue, 3-Wed, 4-Thu, 5-Fri, 6-Sat, 7-Sun
			\| -
	\|-		\|-
	\| 10005		\| 10005
Line 193:		Line 198:
	\| Month-day date, mmdd		\| Month-day date, mmdd
	\| Ex. 9th May => 0x0509, 31th Sept => 0x091F (Sept=0x09, 31=0x1F)		\| Ex. 9th May => 0x0509, 31th Sept => 0x091F (Sept=0x09, 31=0x1F)
			\| -
	\|-		\|-
	\| 10006		\| 10006
Line 200:		Line 206:
	\| Year date, yyyy		\| Year date, yyyy
	\| Ex. 2023		\| Ex. 2023
			\| -
	\|-		\|-
	\| 10007		\| 10007
Line 207:		Line 214:
	\| Alarm status (stop flags)		\| Alarm status (stop flags)
	\| b1-Supply sensor B1, <br>b2-Heater overheating, <br>b3-Water temp. low, <br>b4-Rotor stop, <br>b5-Frost possibility, <br>b6-Air temp. high, <br>b7-Air temp. low <br>(1-Fault, 0-None)		\| b1-Supply sensor B1, <br>b2-Heater overheating, <br>b3-Water temp. low, <br>b4-Rotor stop, <br>b5-Frost possibility, <br>b6-Air temp. high, <br>b7-Air temp. low <br>(1-Fault, 0-None)
			\| -
	\|-		\|-
	\| 10008		\| 10008
Line 214:		Line 222:
	\| Alarm status (stop code)		\| Alarm status (stop code)
	\| 3-Rotor stop, <br>4-Heater overheating, <br>9-Supply sensor B1, <br>19-Air temp. low, <br>20-Air temp. high, <br>27-Water temp. low, <br>28-Frost possibility		\| 3-Rotor stop, <br>4-Heater overheating, <br>9-Supply sensor B1, <br>19-Air temp. low, <br>20-Air temp. high, <br>27-Water temp. low, <br>28-Frost possibility
			\| -
	\|-		\|-
	\| 10009		\| 10009
Line 222:		Line 231:
	\| Ex. 20		\| Ex. 20
	\| 20		\| 20
			\| -
	\|-		\|-
	\| 10010		\| 10010
Line 229:		Line 239:
	\| External heater control signal type		\| External heater control signal type
	\| 0-0..12V analog voltage-type, <br>1-12V digital PWM-type <br>(always 0 if heater configured as water type)		\| 0-0..12V analog voltage-type, <br>1-12V digital PWM-type <br>(always 0 if heater configured as water type)
			\| -
	\|-		\|-
	\| 10011		\| 10011
Line 236:		Line 247:
	\| Unknown		\| Unknown
	\|		\|
			\| -
	\|-		\|-
	\|}		\|}

Ivc: /* General */

2024-04-18T14:21:33Z

General

← Older revision		Revision as of 14:21, 18 April 2024
Line 150:		Line 150:
	\| AHU start/stop control		\| AHU start/stop control
	\| 1-Start, 0-Stop		\| 1-Start, 0-Stop
			\| -
	\|-		\|-
	\| 10000		\| 10000